Hi, I' ve modified Abraham vd Merwe's driver for isp1161 for memory mapped IO to make it work with StrongArm on kernel version 2.4.18-rmk4. When trying to connect a usb mouse I get the following output in the message file: hub.c: USB new device connect on bus1/2, assigned device number 2 usb_control/bulk_msg: timeout unlink URB timeout usb.c: USB device not accepting new address=2 (error=-110) usb_control/bulk_msg: timeout unlink URB timeout usb.c: USB device not accepting new address=3 (error=-110)
Who's got an ISP1161 working on a StrongArm? Regards Boris ------------------------------------------ HERMES SoftLab Boris Stuhec Zolajeva 30 2000 Maribor, Slovenia Tel.: + 386 2 4508931 GSM:+386 31 341 162 SLOVENIA mailto:[EMAIL PROTECTED] ------------------------------------------ ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel