how fast is your strongarm processor? have you measured the interrupt latency and the time it spend in the interrupt?
i have not used isp1161, but i have used cypress sl811, and i have seen the same symptoms... having traced it with a usb traffic analyzer, i found out my cpu was not fast enough and the interrupt latency was too long... (when my sof interrupt comes around, by the time i do something.... the frame time is half over) on 3/11/03 1:58 AM, Boris Stuhec at [EMAIL PROTECTED] wrote: > Hi, > > I' ve modified Abraham vd Merwe's driver for isp1161 for memory mapped IO > to make it work with StrongArm on kernel version 2.4.18-rmk4. > When trying to connect a usb mouse I get the following output in the message > file: > hub.c: USB new device connect on bus1/2, assigned device number 2 > usb_control/bulk_msg: timeout > unlink URB timeout > usb.c: USB device not accepting new address=2 (error=-110) > usb_control/bulk_msg: timeout > unlink URB timeout > usb.c: USB device not accepting new address=3 (error=-110) > > Who's got an ISP1161 working on a StrongArm? > Regards > Boris > > > > > > > > > > > > > ------------------------------------------ > HERMES SoftLab > Boris Stuhec > Zolajeva 30 > 2000 Maribor, Slovenia Tel.: + 386 2 4508931 GSM:+386 31 > 341 162 > SLOVENIA mailto:[EMAIL PROTECTED] > ------------------------------------------ > > > > > > > > > > > > > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Welcome to geek heaven. > http://thinkgeek.com/sf > _______________________________________________ > [EMAIL PROTECTED] > To unsubscribe, use the last form field at: > https://lists.sourceforge.net/lists/listinfo/linux-usb-devel > ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
