Take care that you keep, 1. A 300ns delay between writing the command port and access to the data port. and, 2. A 110ns delay between subsequent data accesses.
regds, saugata On Tue, 11 Mar 2003, Boris Stuhec wrote: > Hi, > > I' ve modified Abraham vd Merwe's driver for isp1161 for memory mapped IO > to make it work with StrongArm on kernel version 2.4.18-rmk4. > When trying to connect a usb mouse I get the following output in the message > file: > hub.c: USB new device connect on bus1/2, assigned device number 2 > usb_control/bulk_msg: timeout > unlink URB timeout > usb.c: USB device not accepting new address=2 (error=-110) > usb_control/bulk_msg: timeout > unlink URB timeout > usb.c: USB device not accepting new address=3 (error=-110) > > Who's got an ISP1161 working on a StrongArm? > Regards > Boris > > > > > > > > > > > > > ------------------------------------------ > HERMES SoftLab > Boris Stuhec > Zolajeva 30 > 2000 Maribor, Slovenia Tel.: + 386 2 4508931 GSM:+386 31 > 341 162 > SLOVENIA mailto:[EMAIL PROTECTED] > ------------------------------------------ > > > > > > > > > > > > > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Welcome to geek heaven. > http://thinkgeek.com/sf > _______________________________________________ > [EMAIL PROTECTED] > To unsubscribe, use the last form field at: > https://lists.sourceforge.net/lists/listinfo/linux-usb-devel > -- ------------------------------------------------------- This SF.net email is sponsored by:Crypto Challenge is now open! Get cracking and register here for some mind boggling fun and the chance of winning an Apple iPod: http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
