Alan Stern <[EMAIL PROTECTED]> writes: > On Wed, 24 Mar 2004, Sean Neakums wrote: > >> With only this patch applied, gphoto2 operates correctly, lsusb no >> longer lists the camera after disconnection, and I see only a single >> suspend_hc message after disconnection. > > I still don't know just what driver or program was causing the problem. > You can help out by trying this one-line patch. It goes on top of the > patch from yesterday. What it does is print a warning message together > with a stack dump into the system log whenever a USB device is > disconnected or a configuration is removed. > > Try running gphoto2 and then disconnecting (or turning off) your scanner, > and send the dmesg output you get. With a little bit of luck, it will > identify the culprit.
I'm not getting any stack traces at all. ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
