Alan Stern wrote: > On this computer, you could try out the OHCI controller simply by plugging > the camera into the USB 2.0 port after unloading the ehci_hcd driver.
I have tried this. Linux does not recognize the camera. Here is the dmesg output. ohci_hcd 0000:00:0b.1: remote wakeup ohci_hcd 0000:00:0b.1: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s hub 3-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x101 ohci_hcd 0000:00:0b.1: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS usb 3-1: new full speed USB device using address 2 usb 3-1: control timeout on ep0in ohci_hcd 0000:00:0b.1: urb c1364a58 path 1 ep0out 5fc20000 cc 5 --> status -110 ohci_hcd 0000:00:0b.1: urb c1364a58 path 1 ep0out 5fc20000 cc 5 --> status -110 usb 3-1: device not accepting address 2, error -110 ohci_hcd 0000:00:0b.1: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS usb 3-1: new full speed USB device using address 3 usb 3-1: control timeout on ep0in ohci_hcd 0000:00:0b.1: urb caca34d8 path 1 ep0out 5fc20000 cc 5 --> status -110 ohci_hcd 0000:00:0b.1: urb caca34d8 path 1 ep0out 5fc20000 cc 5 --> status -110 usb 3-1: device not accepting address 3, error -110 ohci_hcd 0000:00:0b.1: GetStatus roothub.portstatus [1] = 0x00010100 CSC PPS hub 3-0:1.0: port 1, status 0100, change 0001, 12 Mb/s ohci_hcd 0000:00:0b.1: suspend root hub Regards Sven-Olof ------------------------------------------------------- This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel