Alan Stern wrote: > > I'd really expect that a more MSFT-friendlly approach would work. > > Sven-Olof, do you still have patch for that? It's the one in > > http://marc.theaimsgroup.com/?l=linux-usb-users&m=109069803813114 > > Maybe it'll work a little better, maybe not.
I have tried this patch with the PC with USB 2.0 card. But no luck this time either. ehci_hcd 0000:00:0b.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x501 hub 1-0:1.0: port 2 not reset yet, waiting 50ms ehci_hcd 0000:00:0b.2: port 2 high speed ehci_hcd 0000:00:0b.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT usb 1-2: new high speed USB device using address 2 usb 1-2: control timeout on ep0in ehci_hcd 0000:00:0b.2: devpath 2 ep0out 3strikes ehci_hcd 0000:00:0b.2: devpath 2 ep0out 3strikes usb 1-2: device not accepting address 2, error -71 hub 1-0:1.0: port 2 not reset yet, waiting 50ms ehci_hcd 0000:00:0b.2: port 2 high speed ehci_hcd 0000:00:0b.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT usb 1-2: new high speed USB device using address 3 usb 1-2: control timeout on ep0in hub 1-0:1.0: port 2 not reset yet, waiting 50ms ehci_hcd 0000:00:0b.2: port 2 high speed ehci_hcd 0000:00:0b.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT ehci_hcd 0000:00:0b.2: devpath 2 ep0in 3strikes ehci_hcd 0000:00:0b.2: GetStatus port 2 status 001002 POWER sig=se0 CSC Here is another attempt after "rmmod ehci_hcd" ohci_hcd 0000:00:0b.1: remote wakeup ohci_hcd 0000:00:0b.1: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s hub 3-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x101 ohci_hcd 0000:00:0b.1: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS usb 3-1: new full speed USB device using address 2 usb 3-1: control timeout on ep0in ohci_hcd 0000:00:0b.1: urb c9f37258 path 1 ep0out 5fc20000 cc 5 --> status -110 ohci_hcd 0000:00:0b.1: urb c9f37258 path 1 ep0out 5fc20000 cc 5 --> status -110 usb 3-1: device not accepting address 2, error -110 ohci_hcd 0000:00:0b.1: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS usb 3-1: new full speed USB device using address 3 usb 3-1: control timeout on ep0in ohci_hcd 0000:00:0b.1: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS ohci_hcd 0000:00:0b.1: urb cabf15d8 path 1 ep0in 5ed60000 cc 5 --> status -110 ohci_hcd 0000:00:0b.1: GetStatus roothub.portstatus [1] = 0x00030100 PESC CSC PPS ohci_hcd 0000:00:0b.1: GetStatus roothub.portstatus [1] = 0x00030100 PESC CSC PPS hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s ohci_hcd 0000:00:0b.1: GetStatus roothub.portstatus [1] = 0x00020100 PESC PPS hub 3-0:1.0: port 1 enable change, status 00000100 ohci_hcd 0000:00:0b.1: suspend root hub Regards, Sven-Olof ------------------------------------------------------- This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
