>>>>> "Pete" == Pete Zaitcev <[EMAIL PROTECTED]> writes: Pete> On Sat, 11 Mar 2006 15:56:42 +0100, Jan Rychter <[EMAIL PROTECTED]> Pete> wrote: >> I've tried, but I can't get usbmon to work. After finding the tricky >> debugfs switch, the usbmon.ko module does not get built, even though >> it is enabled in configuration.
Pete> By the way, for the archives - usbmon follows core. If core is Pete> built statically, usbmon is built statically too. So it's there, Pete> just needs debugfs mounted and /sys/kernel/debug/usbmon will be Pete> populated without a module. Thanks for the hint. I've attached a trace -- it didn't take long to reproduce the problem. The trace is from a sample printout attempt. One truncated page got printed and then the system went into an endless loop of: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status The -71 error won't appear until I physically turn the printer off. Nothing else will happen either -- this endless loop will just continue. This problem occurs about 75% of the time -- e.g. whenever I try to print something, more than 3 times out of 4 the printer will get stuck. This is not a foo2zjs issue, as the actual zjs output is fine. Also, power cycling the printer sometimes gets me the full printout after CUPS retries printing from the beginning. --J.
hp1200.usbmon.trace.bz2
Description: Binary data
