What is in your kernel logs? That should tell you. On Mon, 2 Jun 2003, Larry Weaver wrote:
> I have recently purchased a Fuji FinePix 3800 digital camera. It works > fine under Windows, but I have been unable to figure out which device > I should mount to mount it under Linux 2.4. > I tried sda and sda1 and got "Not a valid block device". > It seems to be recognized OK in the kernel. > Any help would be very much appreciated. > > Here is /proc/bus/usb/devices: > > cat /proc/bus/usb/devices > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 17/900 us ( 2%), #Int= 1, #Iso= 0 > D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > S: Product=USB UHCI-alt Root Hub > S: SerialNumber=b400 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms > T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=04cb ProdID=011a Rev=10.00 > S: Product=USB Mass Storage > S: SerialNumber=Y-406^^^^^030328XFPX0006027486 > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=05 Prot=00 Driver=usb-storage > E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms > E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl= 1ms > > Here is /proc/scsi: > > # ls -R /proc/scsi > /proc/scsi: > ide-scsi/ scsi usb-storage-0/ usb-storage-1/ > > /proc/scsi/ide-scsi: > 2 > > /proc/scsi/usb-storage-0: > 0 > > /proc/scsi/usb-storage-1: > 1 > > > # cat /proc/scsi/scsi > Attached devices: > Host: scsi2 Channel: 00 Id: 00 Lun: 00 > Vendor: PIONEER Model: DVD-ROM DVD-115R Rev: 1.25 > Type: CD-ROM ANSI SCSI revision: 02 > Host: scsi2 Channel: 00 Id: 01 Lun: 00 > Vendor: SONY Model: CD-RW CRX140E Rev: 1.1a > Type: CD-ROM ANSI SCSI revision: 02 > > Here is lsusb: > > # lsusb > > Bus 001 Device 001: ID 0000:0000 Virtual Hub > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 1.00 > bDeviceClass 9 Hub > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 8 > idVendor 0x0000 Virtual > idProduct 0x0000 Hub > bcdDevice 0.00 > iManufacturer 0 > iProduct 2 USB UHCI-alt Root Hub > iSerial 1 b400 > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 25 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 0 > bmAttributes 0x40 > Self Powered > MaxPower 0mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 9 Hub > bInterfaceSubClass 0 > bInterfaceProtocol 0 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type none > wMaxPacketSize 8 > bInterval 255 > Language IDs: (length=4) > 0000 (null)((null)) > > Bus 001 Device 002: ID 04cb:011a Fuji Photo Film Co., Ltd. > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 1.10 > bDeviceClass 0 Interface > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 64 > idVendor 0x04cb Fuji Photo Film Co., Ltd. > idProduct 0x011a > bcdDevice 10.00 > iManufacturer 0 > iProduct 2 USB Mass Storage > iSerial 3 Y-406^^^^^030328XFPX0006027486 > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 39 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 0 > bmAttributes 0xc0 > Self Powered > MaxPower 0mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 3 > bInterfaceClass 8 Mass Storage > bInterfaceSubClass 5 > bInterfaceProtocol 0 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type none > wMaxPacketSize 64 > bInterval 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x02 EP 2 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type none > wMaxPacketSize 64 > bInterval 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x83 EP 3 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type none > wMaxPacketSize 8 > bInterval 1 > Language IDs: (length=4) > 0409 English(US) > > Here is lspci: > > # lspci -v|grep HCI > 00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02) (prog-if 00 [UHCI]) > 01:0a.0 FireWire (IEEE 1394): Texas Instruments FireWire Controller (rev 01) > (prog-if 10 [OHCI]) > Subsystem: Sony Corporation 8032 OHCI i.LINK (IEEE 1394) Controller > > > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ ------------------------------------------------------- This SF.net email is sponsored by: eBay Get office equipment for less on eBay! http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5 _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
