usb.c: new device strings: Mfr=0, Product=0, SerialNumber=0
hub.c: USB hub found
hub.c: 4 ports detected
hub.c: individual port power switching
hub.c: standalone hub
hub.c: individual port over-current protection
hub.c: power on to power good time: 100ms
hub.c: hub controller current requirement: 100mA
hub.c: port 1 is removable
hub.c: port 2 is removable
hub.c: port 3 is removable
hub.c: port 4 is removable
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface cff79c40
hub.c: port 1 connection change
hub.c: portstatus 101, change 1, High Speed
Adding Swap: 88320k swap-space (priority -1)
hub.c: portstatus 103, change 10, High Speed
usb.c: USB new device connect, assigned device number 4
usb.c: kmalloc IF cff79f80, numif 1
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=5
usb.c: USB device number 4 default language ID 0x409
Manufacturer: Microtech International, Inc.
Product: USB-SCSI-HD50
SerialNumber: 07
usb.c: unhandled interfaces on device
usb.c: This device is not recognized by any installed USB driver.
Length = 18
DescriptorType = 01
USB version = 1.00
Vendor:Product = 07af:0005
MaxPacketSize0 = 64
NumConfigurations = 1
Device version = 1.00
Device Class:SubClass:Protocol = 00:00:00
Per-interface classes
Configuration:
bLength = 9
bDescriptorType = 02
wTotalLength = 0020
bNumInterfaces = 01
bConfigurationValue = 01
iConfiguration = 03
bmAttributes = 40
MaxPower = 0mA
Interface: 0
Alternate Setting: 0
bLength = 9
bDescriptorType = 04
bInterfaceNumber = 00
bAlternateSetting = 00
bNumEndpoints = 02
bInterface Class:SubClass:Protocol = 08:06:50
iInterface = 04
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 01 (out)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 82 (in)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.07
hdd: ATAPI 24X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
Serial driver version 4.93 (2000-03-20) with MANY_PORTS SHARE_IRQ SERIAL_PCI
ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at port 0xf400 (irq = 9) is a 16550A
Creative EMU10K1 PCI Audio Driver, version 0.5 , 12:51:32 Apr 11 2000
emu10k1: emu10k1 rev 7 found at IO 0xff80, IRQ 9
Unlink of SHM id 583499777 failed (-1).
Unlink of SHM id 583565314 failed (-1).
usb.c: registered new driver usb-storage
usb-storage: USB Mass Storage device detected
usb-storage: Endpoints In 2 Out 1 Int 0
usb-storage: Result from usb_set_interface is -32
usb-storage: -- clearing stall on control interface
usb-storage: New GUID 07af00050000000000000007
usb-storage: Transport: Bulk
usb-storage: Protocol: Transparent SCSI
usb-storage: *** thread sleeping.
scsi0 : SCSI emulation for USB Mass Storage devices
scsi : 1 host.
usb-storage: us_queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00 12 c0 80 3c
usb-storage: Bulk command S 0x43425355 T 0x1 LUN 0 L 0 F 0 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: Bulk status S 0x53425355 T 0x1 R 0 V 0x1
usb-storage: -- transport indicates command failure
usb-storage: Command FAILED: Issuing auto-REQUEST_SENSE
usb-storage: Bulk command S 0x43425355 T 0x1 LUN 0 L 18 F 128 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: Bulk xfer 0xcd512afc(18)
usb-storage: bulk_msg returned 0 xferred 18/18
usb-storage: Bulk data transfer result 0x0
usb-storage: Bulk status S 0x53425355 T 0x1 R 0 V 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- sense key: 0x6, ASC: 0x29, ASCQ: 0x0
usb-storage: scsi cmd done, result=0x1
usb-storage: *** thread sleeping.
usb-storage: us_queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 00 00 00 ff 00 12 c0 80 3c
usb-storage: Bulk command S 0x43425355 T 0x2 LUN 0 L 256 F 128 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: Bulk xfer 0xc9dc3cc0(256)
usb-storage: bulk_msg returned 0 xferred 255/256
usb-storage: Bulk data transfer result 0x1
usb-storage: clearing endpoint halt for pipe 0xc0010483
usb-storage: us_abort() called
usb-storage: bus_reset() requested but not implemented
usb-storage: Bus reset requested
usb-storage: us_queuecommand() called
usb_control/bulk_msg: timeout
usb-storage: Bulk status result = -110
usb-storage: -- transport indicates transport failure
usb-storage: scsi cmd done, result=0x70000
usb-storage: *** thread sleeping.
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00 12 c0 80 3c
usb-storage: Bulk command S 0x43425355 T 0x2 LUN 0 L 256 F 0 CL 6
usb-storage: bus_reset() requested but not implemented
usb-storage: Bus reset requested
usb-storage: Bulk command transfer result=0
usb-storage: Bulk xfer 0xc9dc3cc0(256)
usb-storage: bulk_msg returned 0 xferred 256/256
usb-storage: Bulk data transfer result 0x0
usb_control/bulk_msg: timeout
usb-storage: us_queuecommand() called
usb-storage: Bulk status result = -110
usb-storage: -- transport indicates transport failure
usb-storage: scsi cmd done, result=0x70000
usb-storage: *** thread sleeping.
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00 12 c0 80 3c
usb-storage: Bulk command S 0x43425355 T 0x2 LUN 0 L 256 F 0 CL 6
usb-storage: us_queuecommand() called
usb-storage: Bulk command transfer result=-32
usb-storage: clearing endpoint halt for pipe 0xc0008403
usb_control/bulk_msg: timeout
usb-storage: Bulk status result = -110
usb-storage: -- transport indicates transport failure
usb-storage: Fixing INQUIRY data, setting SCSI rev to 2
usb-storage: scsi cmd done, result=0x70000
usb-storage: *** thread sleeping.
usb-storage: *** thread awakened.
usb-storage: Bad device number (1/0) or dev 0xcf80ae00
usb-storage: *** thread sleeping.
usb-storage: us_queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad device number (2/0) or dev 0xcf80ae00
usb-storage: *** thread sleeping.
usb-storage: us_queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad device number (3/0) or dev 0xcf80ae00
usb-storage: *** thread sleeping.
usb-storage: us_queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad device number (4/0) or dev 0xcf80ae00
usb-storage: *** thread sleeping.
usb-storage: us_queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad device number (5/0) or dev 0xcf80ae00
usb-storage: *** thread sleeping.
usb-storage: us_queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad device number (6/0) or dev 0xcf80ae00
usb-storage: *** thread sleeping.
usb-storage: us_queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad device number (7/0) or dev 0xcf80ae00
usb-storage: *** thread sleeping.
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 4
usb.c: usb-storage driver claimed interface cff79f80
USB Mass Storage support registered.
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
