[linux-usb] usb_control/bulk_msg: timeout

[Bill Maidment]

Hi

I'm re-posting this under a new subject, so it's not confused with the IRQ problem (which has been solved thanks to Martin Mares).

When I try to use an ov511 camera (RoboCAM) it is not recognised at all. I get the same response from my Wacom Graphire.

I get the following on plug and unplug:
Apr 17 08:58:32 bill kernel: usb_control/bulk_msg: timeout
Apr 17 08:58:44 bill last message repeated 4 times
Apr 17 08:58:44 bill kernel: usb.c: USB device not responding, giving up (error=-110)
Apr 17 08:58:58 bill kernel: usb.c: USB disconnect on device -1

cat /proc/bus/usb/devices AFTER plugging in camera gives:
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=fcc0
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= -1 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 0
P: Vendor=0000 ProdID=0000 Rev= 0.00

cat /proc/bus/usb/drivers gives:
wacom
ov511
cpia
serial
0- 15: usblp
hub
usbdevfs

This is the full log:
Apr 17 08:56:59 bill syslogd 1.3-3: restart.
Apr 17 08:56:59 bill syslog: syslogd startup succeeded
Apr 17 08:56:59 bill syslog: klogd startup succeeded
Apr 17 08:56:59 bill kernel: klogd 1.3-3, log source = /proc/kmsg started.
Apr 17 08:56:59 bill kernel: Inspecting /boot/System.map-2.3.99-pre6
Apr 17 08:57:00 bill kernel: Loaded 13638 symbols from /boot/System.map-2.3.99-pre6.
Apr 17 08:57:00 bill kernel: Symbols match kernel version 2.3.99.
Apr 17 08:57:00 bill kernel: Loaded 67 symbols from 2 modules.
Apr 17 08:57:00 bill kernel: Linux version 2.3.99-pre6 (root@bill) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Mon Apr 17 08:38:18 EST 2000
Apr 17 08:57:00 bill kernel: e820: 0009f800 @ 00000000 (usable)
Apr 17 08:57:00 bill kernel: e820: 00000800 @ 0009f800 (reserved)
Apr 17 08:57:00 bill kernel: e820: 0000fc00 @ 000f0400 (reserved)
Apr 17 08:57:00 bill kernel: e820: 08f00000 @ 00100000 (usable)
Apr 17 08:57:00 bill kernel: e820: 0000fc00 @ ffff0400 (reserved)
Apr 17 08:57:00 bill kernel: On node 0 totalpages: 36864
Apr 17 08:57:00 bill kernel: zone(0): 4096 pages.
Apr 17 08:57:00 bill kernel: zone(1): 32768 pages.
Apr 17 08:57:00 bill kernel: zone(2): 0 pages.
Apr 17 08:57:00 bill kernel: Initializing CPU#0
Apr 17 08:57:00 bill kernel: Detected 265269727 Hz processor.
Apr 17 08:57:00 bill kernel: Console: colour VGA+ 80x43
Apr 17 08:57:00 bill kernel: Calibrating delay loop... 529.20 BogoMIPS
Apr 17 08:57:00 bill kernel: Memory: 142140k/147456k available (1485k kernel code, 4928k reserved, 99k data, 168k init, 0k highmem)
Apr 17 08:57:00 bill kernel: Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Apr 17 08:57:00 bill kernel: Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
Apr 17 08:57:00 bill kernel: CPU: Intel Pentium II (Deschutes) stepping 00
Apr 17 08:57:00 bill kernel: Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Apr 17 08:57:00 bill kernel: Checking 'hlt' instruction... OK.
Apr 17 08:57:00 bill kernel: POSIX conformance testing by UNIFIX
Apr 17 08:57:00 bill kernel: mtrr: v1.36 (20000221) Richard Gooch ([EMAIL PROTECTED])
Apr 17 08:57:00 bill atd: atd startup succeeded
Apr 17 08:57:00 bill kernel: PCI: PCI BIOS revision 2.10 entry at 0xfda13, last bus=0
Apr 17 08:57:00 bill kernel: PCI: Using configuration type 1
Apr 17 08:57:00 bill kernel: PCI: Probing PCI hardware
Apr 17 08:57:00 bill kernel: PCI: Using IRQ router PIIX [8086/122e] at 00:07.0
Apr 17 08:57:00 bill kernel: PCI: Guessed IRQ 11 for device 00:04.0
Apr 17 08:57:00 bill kernel: PCI: Guessed IRQ 11 for device 00:04.1
Apr 17 08:57:00 bill kernel: PCI: Guessed IRQ 10 for device 00:07.2
Apr 17 08:57:00 bill kernel: Limiting direct PCI/PCI transfers.

Apr 17 08:57:00 bill kernel: isapnp: Scanning for Pnp cards...
Apr 17 08:57:00 bill kernel: isapnp: No Plug & Play device found
Apr 17 08:57:00 bill kernel: Linux NET4.0 for Linux 2.3
Apr 17 08:57:00 bill kernel: Based upon Swansea University Computer Society NET3.039
Apr 17 08:57:00 bill kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Apr 17 08:57:00 bill kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Apr 17 08:57:00 bill kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Apr 17 08:57:00 bill kernel: IP: routing cache hash table of 1024 buckets, 8Kbytes
Apr 17 08:57:00 bill kernel: TCP: Hash tables configured (established 16384 bind 16384)
Apr 17 08:57:00 bill kernel: IPv4 over IPv4 tunneling driver
Apr 17 08:57:00 bill kernel: early initialization of device tunl0 is deferred
Apr 17 08:57:00 bill kernel: GRE over IPv4 tunneling driver
Apr 17 08:57:00 bill kernel: early initialization of device gre0 is deferred
Apr 17 08:57:00 bill kernel: Linux IP multicast router 0.06 plus PIM-SM
Apr 17 08:57:00 bill kernel: Initializing RT netlink socket
Apr 17 08:57:00 bill kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.13)
Apr 17 08:57:00 bill kernel: Starting kswapd v1.6
Apr 17 08:57:00 bill kernel: 0x378: FIFO is 16 bytes
Apr 17 08:57:00 bill kernel: 0x378: writeIntrThreshold is 7
Apr 17 08:57:00 bill kernel: 0x378: readIntrThreshold is 7
Apr 17 08:57:00 bill kernel: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,ECP]
Apr 17 08:57:00 bill kernel: parport0: irq 7 detected
Apr 17 08:57:00 bill kernel: pty: 256 Unix98 ptys configured
Apr 17 08:57:00 bill kernel: lp0: using parport0 (polling).
Apr 17 08:57:00 bill kernel: Uniform Multi-Platform E-IDE driver Revision: 6.30
Apr 17 08:57:00 bill kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Apr 17 08:57:00 bill kernel: PIIX4: IDE controller on PCI bus 00 dev 39
Apr 17 08:57:00 bill kernel: PIIX4: not 100% native mode: will probe irqs later
Apr 17 08:57:00 bill kernel: ide0: BM-DMA at 0xfcf0-0xfcf7, BIOS settings: hda:DMA, hdb:pio
Apr 17 08:57:00 bill kernel: ide1: BM-DMA at 0xfcf8-0xfcff, BIOS settings: hdc:DMA, hdd:pio
Apr 17 08:57:00 bill kernel: hda: IBM-DADA-26480, ATA DISK drive
Apr 17 08:57:00 bill kernel: hdc: TORiSAN DVD-ROM DRD-N216, ATAPI CDROM drive
Apr 17 08:57:00 bill kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Apr 17 08:57:00 bill kernel: ide1 at 0x170-0x177,0x376 on irq 15
Apr 17 08:57:00 bill kernel: hda: 12685680 sectors (6495 MB) w/460KiB Cache, CHS=839/240/63, UDMA(33)
Apr 17 08:57:00 bill kernel: hdc: ATAPI DVD-ROM drive, 256kB Cache, DMA
Apr 17 08:57:00 bill kernel: Uniform CD-ROM driver Revision: 3.07
Apr 17 08:57:00 bill kernel: Partition check:
Apr 17 08:57:00 bill kernel: hda: hda1 hda2 < hda5 hda6 hda7 >
Apr 17 08:57:00 bill kernel: Floppy drive(s): fd0 is 1.44M
Apr 17 08:57:00 bill kernel: FDC 0 is a post-1991 82077
Apr 17 08:57:00 bill kernel: Serial driver version 4.93 (2000-03-20) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
Apr 17 08:57:00 bill kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Apr 17 08:57:00 bill kernel: Real Time Clock Driver v1.10b
Apr 17 08:57:00 bill kernel: PPP generic driver version 2.4.1
Apr 17 08:57:00 bill kernel: Linux PCMCIA Card Services 3.1.11
Apr 17 08:57:00 bill kernel: options: [pci] [cardbus] [pm]
Apr 17 08:57:00 bill kernel: Adding cardbus controller 0: Texas Instruments PCI1131
Apr 17 08:57:00 bill kernel: PCI: Enabling device 00:04.0 (0000 -> 0002)
Apr 17 08:57:00 bill kernel: Yenta IRQ list 0498, PCI irq11
Apr 17 08:57:00 bill kernel: Socket status: 30000059
Apr 17 08:57:00 bill kernel: Adding cardbus controller 1: Texas Instruments PCI1131 (#2)
Apr 17 08:57:00 bill kernel: PCI: Enabling device 00:04.1 (0000 -> 0002)
Apr 17 08:57:00 bill kernel: Yenta IRQ list 0498, PCI irq11
Apr 17 08:57:00 bill kernel: Socket status: 30000019
Apr 17 08:57:00 bill kernel: Intel PCIC probe: not found.
Apr 17 08:57:00 bill kernel: IP-Config: No network devices available.
Apr 17 08:57:00 bill kernel: kmem_create: Forcing size word alignment - nfs_fh
Apr 17 08:57:00 bill kernel: VFS: Mounted root (ext2 filesystem) readonly.
Apr 17 08:57:00 bill kernel: Freeing unused kernel memory: 168k freed
Apr 17 08:57:00 bill kernel: Adding Swap: 68000k swap-space (priority -1)
Apr 17 08:57:00 bill kernel: usb.c: registered new driver usbdevfs
Apr 17 08:57:00 bill kernel: usb.c: registered new driver hub
Apr 17 08:57:00 bill kernel: cs: IO port probe 0x1000-0x17ff: clean.
Apr 17 08:57:00 bill kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x220-0x22f 0x300-0x307 0x388-0x38f 0x4d0-0x4d7
Apr 17 08:57:00 bill kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Apr 17 08:57:00 bill kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean.
Apr 17 08:57:00 bill kernel: eth0: NE2000 Compatible: io 0x320, irq 3, hw_addr 00:80:C8:8A:8E:5C
Apr 17 08:57:01 bill crond: crond startup succeeded
Apr 17 08:57:01 bill inet: inetd startup succeeded
Apr 17 08:57:02 bill lpd: lpd startup succeeded
Apr 17 08:57:02 bill keytable: Loading keymap: Loading system font:
Apr 17 08:57:02 bill rc: Starting keytable succeeded
Apr 17 08:57:03 bill sendmail: sendmail startup succeeded
Apr 17 08:57:04 bill gpm: gpm startup succeeded
Apr 17 08:57:05 bill vmnet-dhcpd: Internet Software Consortium DHCP Server 2.0
Apr 17 08:57:05 bill vmnet-dhcpd: Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
Apr 17 08:57:05 bill vmnet-dhcpd: All rights reserved.
Apr 17 08:57:05 bill vmnet-dhcpd:
Apr 17 08:57:05 bill vmnet-dhcpd: Please contribute if you find this software useful.
Apr 17 08:57:05 bill vmnet-dhcpd: For info, please visit http://www.isc.org/dhcp-contrib.html
Apr 17 08:57:05 bill vmnet-dhcpd:
Apr 17 08:57:05 bill vmnet-dhcpd: Configured subnet: 192.168.50.0
Apr 17 08:57:05 bill vmnet-dhcpd: Setting vmnet-dhcp IP address: 192.168.50.254
Apr 17 08:57:05 bill vmnet-dhcpd: Recving on VNet/vmnet1/192.168.50.0
Apr 17 08:57:05 bill vmnet-dhcpd: Sending on VNet/vmnet1/192.168.50.0
Apr 17 08:57:06 bill xfs: xfs startup succeeded
Apr 17 08:57:09 bill smb: smbd startup succeeded
Apr 17 08:57:09 bill smb: nmbd startup succeeded
Apr 17 08:57:10 bill linuxconf: Linuxconf final setup
Apr 17 08:57:13 bill rc: Starting linuxconf succeeded
Apr 17 08:57:13 bill kernel: ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996
Apr 17 08:57:13 bill kernel: YM3812 and OPL-3 driver Copyright (C) by Hannu
Savolainen, Rob Hooft 1993-1996
Apr 17 08:57:13 bill kernel: usb-uhci.c: $Revision: 1.228 $ time 08:51:07 Apr 17 2000
Apr 17 08:57:13 bill kernel: usb-uhci.c: High bandwidth mode enabled
Apr 17 08:57:13 bill kernel: PCI: Enabling device 00:07.2 (0000 -> 0001)
Apr 17 08:57:13 bill kernel: usb-uhci.c: Intel USB controller: setting latency timer to 0
Apr 17 08:57:13 bill kernel: usb-uhci.c: USB UHCI at I/O 0xfcc0, IRQ 10
Apr 17 08:57:13 bill kernel: usb-uhci.c: Detected 2 ports
Apr 17 08:57:13 bill kernel: usb.c: new USB bus registered, assigned bus number 1
Apr 17 08:57:13 bill kernel: usb.c: USB new device connect, assigned device number 1
Apr 17 08:57:13 bill kernel: Product: USB UHCI Root Hub
Apr 17 08:57:13 bill kernel: SerialNumber: fcc0
Apr 17 08:57:13 bill kernel: hub.c: USB hub found
Apr 17 08:57:13 bill kernel: hub.c: 2 ports detected
Apr 17 08:57:13 bill kernel: Linux video capture interface: v1.00
Apr 17 08:57:13 bill kernel: usb.c: registered new driver usblp
Apr 17 08:57:13 bill kernel: mice: PS/2 mouse device common for all mice
Apr 17 08:57:13 bill kernel: usb.c: registered new driver serial
Apr 17 08:57:13 bill kernel: usbserial.c: support registered
Apr 17 08:57:13 bill kernel: V4L-Driver for Vision CPiA based cameras v0.7.4
Apr 17 08:57:13 bill kernel: usb.c: registered new driver cpia
Apr 17 08:57:13 bill kernel: usb.c: registered new driver ov511
Apr 17 08:57:13 bill kernel: ov511.c: ov511 driver registered
Apr 17 08:57:13 bill kernel: usb.c: registered new driver wacom
Apr 17 08:57:14 bill kernel: usb.c: USB new device connect, assigned device number 2
Apr 17 08:57:17 bill kernel: usb_control/bulk_msg: timeout
Apr 17 08:57:29 bill last message repeated 4 times
Apr 17 08:57:29 bill kernel: usb.c: USB device not responding, giving up (error=-110)
Apr 17 08:57:35 bill PAM_pwdb[694]: (gdm) session opened for user root by (uid=0)
Apr 17 08:57:35 bill gdm[694]: gdm_slave_session_start: root on :0
Apr 17 08:57:47 bill gnome-name-server[775]: starting
Apr 17 08:57:47 bill gnome-name-server[775]: name server starting
Apr 17 08:58:16 bill kernel: usb.c: USB disconnect on device -1
Apr 17 08:58:29 bill kernel: usb.c: USB new device connect, assigned device number 2
Apr 17 08:58:32 bill kernel: usb_control/bulk_msg: timeout
Apr 17 08:58:44 bill last message repeated 4 times
Apr 17 08:58:44 bill kernel: usb.c: USB device not responding, giving up (error=-110)
Apr 17 08:58:58 bill kernel: usb.c: USB disconnect on device -1

==================================================================
You're only jealous because the little penguins are talking to me.
==================================================================
Bill Maidment
Elgas Ltd
Milsons Point
email: [EMAIL PROTECTED]