Hi all,
I trying to get my Iomega ZIP 100 USB working under Redhat6.1 (Kernel
2.2.14). I have patch the kernel using
===============================================
usb-2.3.50-1-for-2.2.14.diff.gz
from >>
http://www.suse.cz/development/usb-backport/
===============================================
This advice come from
=====================================================================
http://linuxusbguide.sourceforge.net/USB-guide-1.0.6/c122.html#AEN124
=====================================================================
So I patched the kernel and make xconfig again where thereis USB support
there already. So i enabled it and choosed the one that support my
motherboard.
Everything goes smoothly in compiled the kernel again and reboot
I have _attached_ the >>> dmesg <<<< in this mail.
The problems is when I'm using USBview from
================================
http://www.kroah.com/linux-usb/
================================
I complains can't find /proc/bus/usb/devices, after that i read the USB
guide again and do
====================================
mount -t usbdevfs none /proc/bus/usb
====================================
as adviced in USB guide.
It said I should have folder devices and drivers after i executing tha
command. But still the /proc/bus/usb is still empty (nothing inside).
I not really understand reading the dmesg but it seems to me that it
said that the kernel has detected Iomega product and USB 100 Zip.
Any idea?
Thanks,
Irvan
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 262144 bhash 65536)
Starting kswapd v 1.5
parport0: PC-style at 0x378 [SPP,PS2]
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: version v1.184 time 03:58:31 Apr 17 2000
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
usb.c: USB new device connect, assigned device number 1
usb.c: kmalloc IF cffe5360, numif 1
usb.c: new device strings: Mfr=0, Product=0, SerialNumber=0
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: ganged power switching
hub.c: standalone hub
hub.c: global over-current protection
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port 1 is removable
hub.c: port 2 is removable
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: usb-bandwidth-alloc: was: 0, new: 17, bustime = 17 us, Pipe allowed: yes
usb.c: bw_alloc bumped to 17 for 1 requesters
usb.c: hub driver claimed interface cffe5360
Length = 18
DescriptorType = 01
USB version = 1.00
Vendor:Product = 0000:0000
MaxPacketSize0 = 8
NumConfigurations = 1
Device version = 0.00
Device Class:SubClass:Protocol = 09:00:00
Hub device class
Configuration:
bLength = 9
bDescriptorType = 02
wTotalLength = 0019
bNumInterfaces = 01
bConfigurationValue = 01
iConfiguration = 00
bmAttributes = 40
MaxPower = 0mA
Interface: 0
Alternate Setting: 0
bLength = 9
bDescriptorType = 04
bInterfaceNumber = 00
bAlternateSetting = 00
bNumEndpoints = 01
bInterface Class:SubClass:Protocol = 09:00:00
iInterface = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 81 (in)
bmAttributes = 03 (Interrupt)
wMaxPacketSize = 0008
bInterval = ff
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
lp0: using parport0 (polling).
es1371: version v0.19 time 03:58:13 Apr 17 2000
js: Joystick driver v1.2.15 (c) 1999 Vojtech Pavlik <[EMAIL PROTECTED]>
i2c: initialized
Linux video capture interface: v1.00
bttv0: Brooktree Bt878 (rev 2) bus: 0, devfn: 64, irq: 11, memory: 0xe8000000.
bttv: 1 Bt8xx card(s) found.
bttv0: NO fader chip: TEA6300
bttv0: model: BT878(Miro)
Trust FM Radio card driver v1.0.
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: ST328040A, ATA DISK drive
hdb: ATAPI 44X CDROM, ATAPI CDROM drive
hdc: ST32122A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: ST328040A, 27199MB w/512kB Cache, CHS=3467/255/63, UDMA
hdc: ST32122A, 2014MB w/128kB Cache, CHS=4092/16/63, UDMA
hub.c: port 1 connection change
hdb: ATAPI 40X CD-ROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.56
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
scsi : 1 host.
scsi : detected total.
plip: parport0 has no IRQ.
plip: no devices registered
PPP: version 2.3.7 (demand dialling)
TCP compression code copyright 1989 Regents of the University of California
PPP line discipline registered.
ne2k-pci.c:vpre-1.00e 5/27/99 D. Becker/P. Gortmaker
http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html
ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0xec00, IRQ 10.
eth0: RealTek RTL-8029 found at 0xec00, IRQ 10, 00:40:05:66:31:2C.
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 > hda3
hdc: [PTBL] [1023/64/63] hdc1 hdc2 <<7>hub.c: portstatus 101, change 1, High Speed
hdc5 >
NTFS version 990411
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 76k freed
hub.c: portstatus 103, change 0, High Speed
usb.c: USB new device connect, assigned device number 2
usb.c: kmalloc IF cfccc7c0, numif 1
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=5
usb.c: USB device number 2 default language ID 0x409
usb-uhci-debug.h: uhci_show_td cfcfb8a0 (0FCFB8A0)
usb-uhci-debug.h: MaxLen=3f DT1 EndPt=0 Dev=2, PID=69( IN ) (buf=0ffdcc80)
usb-uhci-debug.h: Len=0d e3 SPD
usb-uhci-debug.h: Breadth first, link points to TD @ 0fcfb860
usb-uhci-debug.h: uhci_show_td cfcfb960 (0FCFB960)
usb-uhci-debug.h: MaxLen=7ff DT1 EndPt=0 Dev=2, PID=e1( OUT ) (buf=00000000)
usb-uhci-debug.h: Len=00 e3 IOC Active
usb-uhci-debug.h: Link Terminate
Manufacturer: Iomega
usb-uhci-debug.h: uhci_show_td cfcfb760 (0FCFB760)
usb-uhci-debug.h: MaxLen=3f DT1 EndPt=0 Dev=2, PID=69( IN ) (buf=0ffdcc80)
usb-uhci-debug.h: Len=17 e3 SPD
usb-uhci-debug.h: Breadth first, link points to TD @ 0fcfb7a0
usb-uhci-debug.h: uhci_show_td cfcfba20 (0FCFBA20)
usb-uhci-debug.h: MaxLen=7ff DT1 EndPt=0 Dev=2, PID=e1( OUT ) (buf=00000000)
usb-uhci-debug.h: Len=00 e3 IOC Active
usb-uhci-debug.h: Link Terminate
Product: USB Zip 100
usb-uhci-debug.h: uhci_show_td cfcfb920 (0FCFB920)
usb-uhci-debug.h: MaxLen=3f DT1 EndPt=0 Dev=2, PID=69( IN ) (buf=0ffdcc80)
usb-uhci-debug.h: Len=21 e3 SPD
usb-uhci-debug.h: Breadth first, link points to TD @ 0fcfb8e0
usb-uhci-debug.h: uhci_show_td cfcfb820 (0FCFB820)
usb-uhci-debug.h: MaxLen=7ff DT1 EndPt=0 Dev=2, PID=e1( OUT ) (buf=00000000)
usb-uhci-debug.h: Len=00 e3 IOC Active
usb-uhci-debug.h: Link Terminate
SerialNumber: 0000000000B7A8C3
usb.c: unhandled interfaces on device
Length = 18
DescriptorType = 01
USB version = 1.00
Vendor:Product = 059b:0001
MaxPacketSize0 = 64
NumConfigurations = 1
Device version = 1.00
Device Class:SubClass:Protocol = 00:00:00
Per-interface classes
Configuration:
bLength = 9
bDescriptorType = 02
wTotalLength = 0027
bNumInterfaces = 01
bConfigurationValue = 01
iConfiguration = 03
bmAttributes = 40
MaxPower = 0mA
Interface: 0
Alternate Setting: 0
bLength = 9
bDescriptorType = 04
bInterfaceNumber = 00
bAlternateSetting = 00
bNumEndpoints = 03
bInterface Class:SubClass:Protocol = 08:06:50
iInterface = 04
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 01 (out)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 82 (in)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 83 (in)
bmAttributes = 03 (Interrupt)
wMaxPacketSize = 0002
bInterval = 20
Adding Swap: 289128k swap-space (priority -1)
lp0 off-line
registered device ppp0
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
