Hi all,
Thanks to Randy who help me to patch the kernel 2.2.14 which inside
/proc/bus/usb is empty.
Now it's working and thereis something inside already
[root@localhost usb]# mount -t usbdevfs none /proc/bus/usb
[root@localhost usb]# ls -al
total 0
dr-xr-xr-x 1 root root 0 Apr 19 23:01 .
dr-xr-xr-x 4 root root 0 Apr 19 22:59 ..
dr-xr-xr-x 1 root root 0 Apr 19 23:01 001
-r--r--r-- 1 root root 0 Apr 19 23:01 devices
-r--r--r-- 1 root root 0 Apr 19 23:01 drivers
[root@localhost usb]# cat drivers
hub
usbdevfs
[root@localhost usb]# cat devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 17/900 us ( 2%), #Int= 1, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=059b ProdID=0001 Rev= 1.00
S: Manufacturer=Iomega
S: Product=USB Zip 100
S: SerialNumber=0000000000B7A8C3
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl= 32ms
Well If I run USBview also show something about my ZIP 100 drive
[root@localhost scsi]# echo "scsi add-single-device 1 0 0 0" >
/proc/scsi/scsi
[root@localhost scsi]# pwd
/proc/scsi
[root@localhost scsi]# cat scsi
Attached devices: none
>From what I understand there must be something inside, according to USB
guide.
I have also try to mount /dev/sdxx and it doesn't work. Any idea?
I have attached my latest "dmesg"
Thanks,
Irvan
parport0 (polling).
es1371: version v0.19 time 04:07:04 Apr 19 2000
js: Joystick driver v1.2.15 (c) 1999 Vojtech Pavlik <[EMAIL PROTECTED]>
i2c: initialized
Linux video capture interface: v1.00
bttv0: Brooktree Bt878 (rev 2) bus: 0, devfn: 64, irq: 11, memory: 0xe8000000.
bttv: 1 Bt8xx card(s) found.
bttv0: NO fader chip: TEA6300
bttv0: model: BT878(Miro)
Trust FM Radio card driver v1.0.
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: ST328040A, ATA DISK drive
hdb: ATAPI 44X CDROM, ATAPI CDROM drive
hdc: ST32122A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: ST328040A, 27199MB w/512kB Cache, CHS=3467/255/63, UDMA
hdc: ST32122A, 2014MB w/128kB Cache, CHS=4092/16/63, UDMA
hub.c: port 1 connection change
hdb: ATAPI 40X CD-ROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.56
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
scsi : 1 host.
scsi : detected total.
plip: parport0 has no IRQ.
plip: no devices registered
PPP: version 2.3.7 (demand dialling)
TCP compression code copyright 1989 Regents of the University of California
PPP line discipline registered.
ne2k-pci.c:vpre-1.00e 5/27/99 D. Becker/P. Gortmaker
http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html
ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0xec00, IRQ 10.
eth0: RealTek RTL-8029 found at 0xec00, IRQ 10, 00:40:05:66:31:2C.
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 > hda3
hdc: [PTBL] [1023/64/63] hdc1 hdc2 <<7>hub.c: portstatus 101, change 1, High Speed
hdc5 >
NTFS version 990411
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 76k freed
hub.c: portstatus 103, change 0, High Speed
usb.c: USB new device connect, assigned device number 2
usb.c: kmalloc IF cfccc7c0, numif 1
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=5
usb.c: USB device number 2 default language ID 0x409
usb-uhci-debug.h: uhci_show_td cfcfb8a0 (0FCFB8A0)
usb-uhci-debug.h: MaxLen=3f DT1 EndPt=0 Dev=2, PID=69( IN ) (buf=0ffdcc80)
usb-uhci-debug.h: Len=0d e3 SPD
usb-uhci-debug.h: Breadth first, link points to TD @ 0fcfb860
usb-uhci-debug.h: uhci_show_td cfcfb960 (0FCFB960)
usb-uhci-debug.h: MaxLen=7ff DT1 EndPt=0 Dev=2, PID=e1( OUT ) (buf=00000000)
usb-uhci-debug.h: Len=00 e3 IOC Active
usb-uhci-debug.h: Link Terminate
Manufacturer: Iomega
usb-uhci-debug.h: uhci_show_td cfcfb760 (0FCFB760)
usb-uhci-debug.h: MaxLen=3f DT1 EndPt=0 Dev=2, PID=69( IN ) (buf=0ffdcc80)
usb-uhci-debug.h: Len=17 e3 SPD
usb-uhci-debug.h: Breadth first, link points to TD @ 0fcfb7a0
usb-uhci-debug.h: uhci_show_td cfcfba20 (0FCFBA20)
usb-uhci-debug.h: MaxLen=7ff DT1 EndPt=0 Dev=2, PID=e1( OUT ) (buf=00000000)
usb-uhci-debug.h: Len=00 e3 IOC Active
usb-uhci-debug.h: Link Terminate
Product: USB Zip 100
usb-uhci-debug.h: uhci_show_td cfcfb920 (0FCFB920)
usb-uhci-debug.h: MaxLen=3f DT1 EndPt=0 Dev=2, PID=69( IN ) (buf=0ffdcc80)
usb-uhci-debug.h: Len=21 e3 SPD
usb-uhci-debug.h: Breadth first, link points to TD @ 0fcfb8e0
usb-uhci-debug.h: uhci_show_td cfcfb820 (0FCFB820)
usb-uhci-debug.h: MaxLen=7ff DT1 EndPt=0 Dev=2, PID=e1( OUT ) (buf=00000000)
usb-uhci-debug.h: Len=00 e3 IOC Active
usb-uhci-debug.h: Link Terminate
SerialNumber: 0000000000B7A8C3
usb.c: unhandled interfaces on device
Length = 18
DescriptorType = 01
USB version = 1.00
Vendor:Product = 059b:0001
MaxPacketSize0 = 64
NumConfigurations = 1
Device version = 1.00
Device Class:SubClass:Protocol = 00:00:00
Per-interface classes
Configuration:
bLength = 9
bDescriptorType = 02
wTotalLength = 0027
bNumInterfaces = 01
bConfigurationValue = 01
iConfiguration = 03
bmAttributes = 40
MaxPower = 0mA
Interface: 0
Alternate Setting: 0
bLength = 9
bDescriptorType = 04
bInterfaceNumber = 00
bAlternateSetting = 00
bNumEndpoints = 03
bInterface Class:SubClass:Protocol = 08:06:50
iInterface = 04
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 01 (out)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 82 (in)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 83 (in)
bmAttributes = 03 (Interrupt)
wMaxPacketSize = 0002
bInterval = 20
Adding Swap: 289128k swap-space (priority -1)
lp0 off-line
registered device ppp0
usb-uhci-debug.h: uhci_show_td cfcfb9e0 (0FCFB9E0)
usb-uhci-debug.h: MaxLen=3f DT1 EndPt=0 Dev=2, PID=69( IN ) (buf=0f7e2480)
usb-uhci-debug.h: Len=0d e3 SPD
usb-uhci-debug.h: Breadth first, link points to TD @ 0fcfb9a0
usb-uhci-debug.h: uhci_show_td cfcfb720 (0FCFB720)
usb-uhci-debug.h: MaxLen=7ff DT1 EndPt=0 Dev=2, PID=e1( OUT ) (buf=00000000)
usb-uhci-debug.h: Len=00 e3 IOC Active
usb-uhci-debug.h: Link Terminate
usb-uhci-debug.h: uhci_show_td cfcfb8a0 (0FCFB8A0)
usb-uhci-debug.h: MaxLen=3f DT1 EndPt=0 Dev=2, PID=69( IN ) (buf=0f7e2480)
usb-uhci-debug.h: Len=17 e3 SPD
usb-uhci-debug.h: Breadth first, link points to TD @ 0fcfb860
usb-uhci-debug.h: uhci_show_td cfcfb960 (0FCFB960)
usb-uhci-debug.h: MaxLen=7ff DT1 EndPt=0 Dev=2, PID=e1( OUT ) (buf=00000000)
usb-uhci-debug.h: Len=00 e3 IOC Active
usb-uhci-debug.h: Link Terminate
usb-uhci-debug.h: uhci_show_td cfcfb760 (0FCFB760)
usb-uhci-debug.h: MaxLen=3f DT1 EndPt=0 Dev=2, PID=69( IN ) (buf=0f7e2480)
usb-uhci-debug.h: Len=21 e3 SPD
usb-uhci-debug.h: Breadth first, link points to TD @ 0fcfb7a0
usb-uhci-debug.h: uhci_show_td cfcfba20 (0FCFBA20)
usb-uhci-debug.h: MaxLen=7ff DT1 EndPt=0 Dev=2, PID=e1( OUT ) (buf=00000000)
usb-uhci-debug.h: Len=00 e3 IOC Active
usb-uhci-debug.h: Link Terminate
usb-uhci-debug.h: uhci_show_td cfcfb920 (0FCFB920)
usb-uhci-debug.h: MaxLen=3f DT1 EndPt=0 Dev=2, PID=69( IN ) (buf=0f7e2480)
usb-uhci-debug.h: Len=0d e3 SPD
usb-uhci-debug.h: Breadth first, link points to TD @ 0fcfb8e0
usb-uhci-debug.h: uhci_show_td cfcfb820 (0FCFB820)
usb-uhci-debug.h: MaxLen=7ff DT1 EndPt=0 Dev=2, PID=e1( OUT ) (buf=00000000)
usb-uhci-debug.h: Len=00 e3 IOC Active
usb-uhci-debug.h: Link Terminate
usb-uhci-debug.h: uhci_show_td cfcfb9e0 (0FCFB9E0)
usb-uhci-debug.h: MaxLen=3f DT1 EndPt=0 Dev=2, PID=69( IN ) (buf=0f7e2480)
usb-uhci-debug.h: Len=17 e3 SPD
usb-uhci-debug.h: Breadth first, link points to TD @ 0fcfb9a0
usb-uhci-debug.h: uhci_show_td cfcfb720 (0FCFB720)
usb-uhci-debug.h: MaxLen=7ff DT1 EndPt=0 Dev=2, PID=e1( OUT ) (buf=00000000)
usb-uhci-debug.h: Len=00 e3 IOC Active
usb-uhci-debug.h: Link Terminate
usb-uhci-debug.h: uhci_show_td cfcfb8a0 (0FCFB8A0)
usb-uhci-debug.h: MaxLen=3f DT1 EndPt=0 Dev=2, PID=69( IN ) (buf=0f7e2480)
usb-uhci-debug.h: Len=21 e3 SPD
usb-uhci-debug.h: Breadth first, link points to TD @ 0fcfb860
usb-uhci-debug.h: uhci_show_td cfcfb960 (0FCFB960)
usb-uhci-debug.h: MaxLen=7ff DT1 EndPt=0 Dev=2, PID=e1( OUT ) (buf=00000000)
usb-uhci-debug.h: Len=00 e3 IOC Active
usb-uhci-debug.h: Link Terminate
scsi singledevice 1 0 0 0
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
