On Sat, May 20, 2000, Jason Sharpee <[EMAIL PROTECTED]> wrote:
> I was stress testing my Linksys 10/100TX usb ethernet adapter with the
> 2.3.99pre9-2 usb-uhci and pegasus drivers, by ftp'ing a 750Meg file.
> Always at about ~500megs into the transfer I get the following printk
> messages.
>
> ........
> pegasus.c: eth0: Tx timed out. Reseting...
> usb-uhci.c: ENXIO c0010200, flags 0 urb c10c60b8, burb c10c60b8
> pegasus.c: failed tx_urb -6
> usb-uhci.c: ENXIO c0010200, flags 0 urb c10c60b8, burb c10c60b8
> pegasus.c: failed tx_urb -6
> .....last 2 messages repeat until FTP times out at 900 secs....
>
> This is an IOpener system with VIA chipset. Usb detects the irq at 15.
>
> I would like to track this down but am unsure of whether pegasus or uhci
> is the problem here. Let me know if there is anything else I can provide
> or look at to help.
First off, contrary to the subject, this is about usb-uhci.c, not
uhci.c.
That error message is generated when an URB is trying to be submitted
for a pipe that already has an active URB.
However, looking at that error message, it looks like it's trying to
resubmit an already active URB.
I'd take a look at the pegasus driver first.
JE
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
