On Wed, Feb 18, 2015 at 03:22:30PM -0500, Nicolas PLANEL wrote: > The ch341_set_baudrate() function initialize the device baud speed according > to the value on priv->baud_rate. By default the ch341_open() set it to a > hardcoded value (DEFAULT_BAUD_RATE 9600). Unfortunately, the tty_struct is > not initialized with the same default value. (usually 56700) > > This means that the tty_struct and the device baud rate generator are not > synchronized after opening the port. > > Fixup is done by calling ch341_set_termios() if tty exist. > Remove unnecessary variable priv->baud_rate setup as it's already done by > ch341_port_probe(). > > Signed-off-by: Nicolas PLANEL <nicolas.pla...@enovance.com>
Thanks for the updated patch. I'll queue it up for 3.20 next week. Thanks, Johan -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
