On Thu, Feb 26, 2015 at 10:02:41AM -0500, Nicolas PLANEL wrote:
> The ch341_set_baudrate() function initialize the device baud speed according
> to the value on priv->baud_rate. By default the ch341_open() set it to a
> hardcoded value (DEFAULT_BAUD_RATE 9600). Unfortunately, the tty_struct is
> not initialized with the same default value. (usually 56700)
>
> This means that the tty_struct and the device baud rate generator are not
> synchronized after opening the port.
>
> Fixup is done by calling ch341_set_termios() if tty exist.
> Remove unnecessary variable priv->baud_rate setup as it's already done by
> ch341_port_probe().
Please try to break your commit message lines at about 72 cols or so.
> Signed-off-by: Nicolas PLANEL <nicolas.pla...@enovance.com>
> ---
> drivers/usb/serial/ch341.c | 9 +++++++--
> 1 file changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
> index 2d72aa3564a3..5d28ca165fdf 100644
> --- a/drivers/usb/serial/ch341.c
> +++ b/drivers/usb/serial/ch341.c
> @@ -84,6 +84,10 @@ struct ch341_private {
> u8 line_status; /* active status of modem control inputs */
> };
>
> +static void ch341_set_termios(struct tty_struct *tty,
> + struct usb_serial_port *port,
> + struct ktermios *old_termios);
> +
> static int ch341_control_out(struct usb_device *dev, u8 request,
> u16 value, u16 index)
> {
> @@ -309,8 +313,6 @@ static int ch341_open(struct tty_struct *tty, struct
> usb_serial_port *port)
> struct ch341_private *priv = usb_get_serial_port_data(port);
> int r;
>
> - priv->baud_rate = DEFAULT_BAUD_RATE;
> -
> r = ch341_configure(serial->dev, priv);
> if (r)
> goto out;
> @@ -323,6 +325,9 @@ static int ch341_open(struct tty_struct *tty, struct
> usb_serial_port *port)
> if (r)
> goto out;
>
> + if (tty)
> + ch341_set_termios(tty, port, NULL);
> +
Thanks for the v3. Looking at the code now, I see that the calls to
set baudrate and handshake in open are still there. I think you should
remove those now that you call set_termios.
Care to fix that up and resend?
Thanks,
Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
