This patch does multiple things:
* add .set_csma_params and .set_frame_retries for the RF212 radio.
This should work fine with RF230, but since I have no RF230 radios to
test with, RF230 does not implement these right now
* enable TX_ARET for frame retransmission limits greater than -1
Since RF230 has no operations to change CSMA parameters or frame retry
limits, RF230 will not be able to enter TX_ARET with this patch.
Signed-off-by: Phoebe Buckheister <phoebe.buckheis...@itwm.fraunhofer.de>
---
drivers/net/ieee802154/at86rf230.c | 65 +++++++++++++++++++++++++++++++++++-
1 file changed, 64 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ieee802154/at86rf230.c
b/drivers/net/ieee802154/at86rf230.c
index 77b8111..4f87102 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -52,6 +52,7 @@ struct at86rf230_local {
spinlock_t lock;
bool irq_busy;
bool is_tx;
+ bool tx_aret;
int rssi_base_val;
};
@@ -549,7 +550,10 @@ at86rf230_state(struct ieee802154_dev *dev, int state)
} while (val == STATE_TRANSITION_IN_PROGRESS);
- if (val == desired_status)
+ if (val == desired_status ||
+ (desired_status == STATE_RX_ON && val == STATE_BUSY_RX) ||
+ (desired_status == STATE_RX_AACK_ON &&
+ val == STATE_BUSY_RX_AACK))
return 0;
pr_err("unexpected state change: %d, asked for %d\n", val, state);
@@ -570,6 +574,10 @@ at86rf230_start(struct ieee802154_dev *dev)
if (rc)
return rc;
+ rc = at86rf230_state(dev, STATE_FORCE_TX_ON);
+ if (rc)
+ return rc;
+
return at86rf230_state(dev, STATE_RX_AACK_ON);
}
@@ -673,6 +681,12 @@ at86rf230_xmit(struct ieee802154_dev *dev, struct sk_buff
*skb)
if (rc)
goto err_rx;
+ if (lp->tx_aret) {
+ rc = at86rf230_write_subreg(lp, SR_TRX_CMD, STATE_TX_ARET_ON);
+ if (rc)
+ goto err_rx;
+ }
+
rc = at86rf230_write_subreg(lp, SR_TRX_CMD, STATE_BUSY_TX);
if (rc)
goto err_rx;
@@ -827,6 +841,44 @@ at86rf212_set_cca_ed_level(struct ieee802154_dev *dev, s32
level)
return at86rf230_write_subreg(lp, SR_CCA_ED_THRES, desens_steps);
}
+static int
+at86rf212_set_csma_params(struct ieee802154_dev *dev, u8 min_be, u8 max_be,
+ u8 retries)
+{
+ struct at86rf230_local *lp = dev->priv;
+ int rc;
+
+ if (min_be > max_be || max_be > 8 || retries > 5)
+ return -EINVAL;
+
+ rc = at86rf230_write_subreg(lp, SR_MIN_BE, min_be);
+ if (rc)
+ return rc;
+
+ rc = at86rf230_write_subreg(lp, SR_MAX_BE, max_be);
+ if (rc)
+ return rc;
+
+ return at86rf230_write_subreg(lp, SR_MAX_CSMA_RETRIES, max_be);
+}
+
+static int
+at86rf212_set_frame_retries(struct ieee802154_dev *dev, s8 retries)
+{
+ struct at86rf230_local *lp = dev->priv;
+ int rc = 0;
+
+ if (retries < -1 || retries > 15)
+ return -EINVAL;
+
+ lp->tx_aret = retries >= 0;
+
+ if (retries >= 0)
+ rc = at86rf230_write_subreg(lp, SR_MAX_FRAME_RETRIES, retries);
+
+ return rc;
+}
+
static struct ieee802154_ops at86rf230_ops = {
.owner = THIS_MODULE,
.xmit = at86rf230_xmit,
@@ -849,6 +901,8 @@ static struct ieee802154_ops at86rf212_ops = {
.set_lbt = at86rf212_set_lbt,
.set_cca_mode = at86rf212_set_cca_mode,
.set_cca_ed_level = at86rf212_set_cca_ed_level,
+ .set_csma_params = at86rf212_set_csma_params,
+ .set_frame_retries = at86rf212_set_frame_retries,
};
static void at86rf230_irqwork(struct work_struct *work)
@@ -925,6 +979,7 @@ static int at86rf230_hw_init(struct at86rf230_local *lp)
struct at86rf230_platform_data *pdata = lp->spi->dev.platform_data;
int rc, irq_pol;
u8 status;
+ u8 csma_seed[2];
rc = at86rf230_read_subreg(lp, SR_TRX_STATUS, &status);
if (rc)
@@ -948,6 +1003,14 @@ static int at86rf230_hw_init(struct at86rf230_local *lp)
if (rc)
return rc;
+ get_random_bytes(csma_seed, ARRAY_SIZE(csma_seed));
+ rc = at86rf230_write_subreg(lp, SR_CSMA_SEED_0, csma_seed[0]);
+ if (rc)
+ return rc;
+ rc = at86rf230_write_subreg(lp, SR_CSMA_SEED_1, csma_seed[1]);
+ if (rc)
+ return rc;
+
/* CLKM changes are applied immediately */
rc = at86rf230_write_subreg(lp, SR_CLKM_SHA_SEL, 0x00);
if (rc)
--
1.7.9.5
------------------------------------------------------------------------------
Android apps run on BlackBerry 10
Introducing the new BlackBerry 10.2.1 Runtime for Android apps.
Now with support for Jelly Bean, Bluetooth, Mapview and more.
Get your Android app in front of a whole new audience. Start now.
http://pubads.g.doubleclick.net/gampad/clk?id=124407151&iu=/4140/ostg.clktrk
_______________________________________________
Linux-zigbee-devel mailing list
Linux-zigbee-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-zigbee-devel
