I've created a scenario where a document is generated on the AS/400 using
different size fonts, graphics, etc. the print file is set up as an *AFPDS
type, if that matters.
Of course, I'm using Host Print Transform to convert the data to my
printer's language, and lp5250d as a transport to get it to from the
AS/400 to the PC.
Okay, here's the problem...
When I print this document the first time, it works great. But the 2nd
one causes the AS/400 to say that the print writer ended abnormally.
The job log states:
Message . . . . : Error on device PI. Device response code is 6136.
Cause . . . . . : SNA protocol error. There is a probable device
error.
Recovery . . . : Device response codes and their meanings follow:
80040000-Incorrect device address. 20040000-Direction error.
08130000-Bracket bid not supported. 6130-Incorrect data received.
6150-Partial chain received. 6136-Unexpected response received.
6138-System cannot obtain send state. Close the file QPSPLPRT in QSYS
and try the request again. If the error occurs again, enter the ANZPRB
command to run problem analysis.
If I end and restart lp5250d, It does the same thing -- works for the
first spool file, the 2nd one causes it to end with this error again.
I tried the same thing with both LPR/LPD (directly from the AS/400 to
the UNIX box) and with RUMBA under Windows, and did not have any problems,
so its not the document.
Any ideas? Want a tracefile?
-Scott
+---
| This is the LINUX5250 Mailing List!
| To submit a new message, send your mail to [EMAIL PROTECTED]
| To subscribe to this list send email to [EMAIL PROTECTED]
| To unsubscribe from this list send email to [EMAIL PROTECTED]
| Questions should be directed to the list owner/operator: [EMAIL PROTECTED]
+---
