Hi Kurt,
Unfortunately, I'm running V3R2 due to the fact that I'm on a CISC box,
and IBM doesn't like me. :) If there is a PTF for V3R2, I've probably
already got it on tape (I ordered everything I could find back in May
before they stopped making them for V3R2... though I havent gotten
around to installing them yet) but you didn't list one...
At any rate, I highly doubt that this is an AS/400 problem, since I'm
only having it with the lp5250d program thats distributed with this
tn5250 package, and not with RUMBA 2000 (also over TN5250e) or with
a direct lpr request from the AS/400 to the UNIX box.
In other words, if its a problem with the TN5250 server on the AS/400,
why isn't it also happening with RUMBA 2000 using TN5250e?
Thanks for the reply...
On Tue, 13 Jun 2000 [EMAIL PROTECTED] wrote:
> I had a customer with that same problem recently and he applied the latest
> TCP/IP Print Session Enhancement PTFS and he hasn't had a recurrance.
>
> V4RxMx TCP/IP PC5250 Printer Session Fixes for OS/400 - Current as of
> 05/31/2000
>
> The following PTFs are general fixes for configuring PC5250 Printer Session
> over TCP/IP protocol:
> |---------+--------------+--------------+---------------+----------------|
> | |R410 (5769) |R420 (5769) |R430 (5769) |R440(5769) |
> |---------+--------------+--------------+---------------+----------------|
> |57xxTC1 |SF60365 (1000)|SF60530 (1000)|SF60463 (0077) |SF61175 (0147) |
> |---------+--------------+--------------+---------------+----------------|
> |57xx999 |MF23706 (1000)|MF23982 (1000)|MF24191 (1000) |MF24192 (0147) |
> |---------+--------------+--------------+---------------+----------------|
> |57xxSS1 |SF52402 (1000)|SF59303 (1000)|SF62651 (0077) |SF62653 (1000) |
> |---------+--------------+--------------+---------------+----------------|
> |57xxSS1 | |SF47792 (1000)|SF52102 (9131) | |
> |---------+--------------+--------------+---------------+----------------|
> |57xxSS1 | |SF48804 (1000)| | |
> |---------+--------------+--------------+---------------+----------------|
> |57xxSS1 | |SF47400 (8265)| | |
> |---------+--------------+--------------+---------------+----------------|
> |57xxSS1 | |SF51355 (9068)| | |
> |---------+--------------+--------------+---------------+----------------|
>
> Remember to read the cover letters for them. Some have "Enhancements" that
> must be performed before/after PTF load.
> ____________________________________
> Kurt Schroeder AS/400 SupportLine Print
> phone: T/L 8-456-6177 or 507-286-6177
> fax: T/L 8-456-6221 or 507-253-6221
> e-mail: [EMAIL PROTECTED]
>
> Scott Klement <[EMAIL PROTECTED]> on 06-13-2000 02:38:54 PM
>
> Please respond to [EMAIL PROTECTED]
>
> To: [EMAIL PROTECTED]
> cc:
> Subject: (lp5250d) SNA Protocol Error?
>
> I've created a scenario where a document is generated on the AS/400 using
> different size fonts, graphics, etc. the print file is set up as an *AFPDS
> type, if that matters.
>
> Of course, I'm using Host Print Transform to convert the data to my
> printer's language, and lp5250d as a transport to get it to from the
> AS/400 to the PC.
>
> Okay, here's the problem...
>
> When I print this document the first time, it works great. But the 2nd
> one causes the AS/400 to say that the print writer ended abnormally.
>
> The job log states:
>
> Message . . . . : Error on device PI. Device response code is 6136.
> Cause . . . . . : SNA protocol error. There is a probable device
> error.
> Recovery . . . : Device response codes and their meanings follow:
> 80040000-Incorrect device address. 20040000-Direction error.
> 08130000-Bracket bid not supported. 6130-Incorrect data received.
> 6150-Partial chain received. 6136-Unexpected response received.
> 6138-System cannot obtain send state. Close the file QPSPLPRT in QSYS
> and try the request again. If the error occurs again, enter the ANZPRB
> command to run problem analysis.
>
> If I end and restart lp5250d, It does the same thing -- works for the
> first spool file, the 2nd one causes it to end with this error again.
>
> I tried the same thing with both LPR/LPD (directly from the AS/400 to
> the UNIX box) and with RUMBA under Windows, and did not have any problems,
> so its not the document.
>
> Any ideas? Want a tracefile?
>
> -Scott
+---
| This is the LINUX5250 Mailing List!
| To submit a new message, send your mail to [EMAIL PROTECTED]
| To subscribe to this list send email to [EMAIL PROTECTED]
| To unsubscribe from this list send email to [EMAIL PROTECTED]
| Questions should be directed to the list owner/operator: [EMAIL PROTECTED]
+---
