Hi Scott,
On Tue, 13 Jun 2000, Scott Klement wrote:
>
> I've created a scenario where a document is generated on the AS/400 using
> different size fonts, graphics, etc. the print file is set up as an *AFPDS
> type, if that matters.
>
> Of course, I'm using Host Print Transform to convert the data to my
> printer's language, and lp5250d as a transport to get it to from the
> AS/400 to the PC.
>
> Okay, here's the problem...
>
> When I print this document the first time, it works great. But the 2nd
> one causes the AS/400 to say that the print writer ended abnormally.
>
> The job log states:
>
> Message . . . . : Error on device PI. Device response code is 6136.
> Cause . . . . . : SNA protocol error. There is a probable device
> error.
> Recovery . . . : Device response codes and their meanings follow:
> 80040000-Incorrect device address. 20040000-Direction error.
> 08130000-Bracket bid not supported. 6130-Incorrect data received.
> 6150-Partial chain received. 6136-Unexpected response received.
> 6138-System cannot obtain send state. Close the file QPSPLPRT in QSYS
> and try the request again. If the error occurs again, enter the ANZPRB
> command to run problem analysis.
> If I end and restart lp5250d, It does the same thing -- works for the
> first spool file, the 2nd one causes it to end with this error again.
>
> I tried the same thing with both LPR/LPD (directly from the AS/400 to
> the UNIX box) and with RUMBA under Windows, and did not have any problems,
> so its not the document.
>
> Any ideas? Want a tracefile?
>
Why don't you go ahead and send me a trace file. It probably has
something to do with the fact that it's an advanced function printer
device.
Mike
+---
| This is the LINUX5250 Mailing List!
| To submit a new message, send your mail to [EMAIL PROTECTED]
| To subscribe to this list send email to [EMAIL PROTECTED]
| To unsubscribe from this list send email to [EMAIL PROTECTED]
| Questions should be directed to the list owner/operator: [EMAIL PROTECTED]
+---
