Normalement, tu devrais pouvoir pinger ton modem sur son adresse
philippeniquet wrote:
la réponse reste SIOCADDRT: Network is unreachable On Thu, 30 Jan 2003 11:22:01 +0100 John Paul <[EMAIL PROTECTED]> wrote:oops, je n'avais pas fait attention à mon copy paste : l'adresse à utiliser est celle-ci : 193.252.253.87 philippeniquet wrote:réponse à route add default gw 193.248.115.150 SIOCADDRT: Network is unreachable On Thu, 30 Jan 2003 09:44:47 +0100 John Paul <[EMAIL PROTECTED]> wrote:essaye de faire la redéfinition du default gateway: route add default gw 193.248.115.150 philippeniquet wrote:bonjour, voici le résultat lorsque je suis connecté eth0 Lien encap:Ethernet HWaddr 00:50:22:97:B5:D0 inet adr:192.168.1.1 Bcast:192.168.1.255 Masque:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:24 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:100 RX bytes:0 (0.0 b) TX bytes:3192 (3.1 Kb) Interruption:11 Adresse de base:0x7000 lo Lien encap:Boucle locale inet adr:127.0.0.1 Masque:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:82 errors:0 dropped:0 overruns:0 frame:0 TX packets:82 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:5652 (5.5 Kb) TX bytes:5652 (5.5 Kb) ppp0 Lien encap:Protocole Point-à-Point inet adr:193.248.115.150 P-t-P:193.252.253.87 Masque:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:6 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:3 RX bytes:95 (95.0 b) TX bytes:101 (101.0 b) Table de routage IP du noyau Destination Passerelle Genmask Indic Metric Ref Use Iface 193.252.253.87 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 On 29 Jan 2003 23:12:04 +0100 Kennedy van Dam Eric <[EMAIL PROTECTED]> wrote:Le mer 29/01/2003 à 22:36, philippeniquet a écrit :suite de mes précédents messages réponse à Erci Kennedy Van DamTout ce que tu me donnes ici est relatif à ta connexion interne... tout ça m'a l'air correct. Ce qui m'intéresserait, c'est de voir le résultat de ces commands lorsque tu as fait une connexion vers ton FAI. Je suppose que la connexion s'effectue bien mais que tu ne sais pas "sortir" de ton réseau interne. Utilises-tu l'adsl ou une connexion "classique" ?/etc/resolv.conf #search localdomain search localdomain wanadoo.fr nameserver 192.168.1.2 (ça je l'ai vu lorsque j'ai configuré mon réseau) nameserver 193.252.19.3 (dns primaire wanadoo) nameserver 193.252.19.4 (dns secondaire)Tiens ? tu as un serveur DNS interne ??? Eric _______________________________________________________ Linux Mailing List - http://www.unixtech.be Subscribe/Unsubscribe: http://www.unixtech.be/mailman/listinfo/linux Archives: http://www.mail-archive.com/linux@lists.unixtech.be IRC: efnet.unixtech.be:6667 - #unixtech_______________________________________________________ Linux Mailing List - http://www.unixtech.be Subscribe/Unsubscribe: http://www.unixtech.be/mailman/listinfo/linux Archives: http://www.mail-archive.com/linux@lists.unixtech.be IRC: efnet.unixtech.be:6667 - #unixtech_______________________________________________________ Linux Mailing List - http://www.unixtech.be Subscribe/Unsubscribe: http://www.unixtech.be/mailman/listinfo/linux Archives: http://www.mail-archive.com/linux@lists.unixtech.be IRC: efnet.unixtech.be:6667 - #unixtech_______________________________________________________ Linux Mailing List - http://www.unixtech.be Subscribe/Unsubscribe: http://www.unixtech.be/mailman/listinfo/linux Archives: http://www.mail-archive.com/linux@lists.unixtech.be IRC: efnet.unixtech.be:6667 - #unixtech