On Tue, 1 Mar 2005, Richard Smith wrote:
> I've found that Linux up to 2.6.9 (I haven't tested .10) Dosen't do > this fully. With my 440bx chipset there are config registers in the > northbridge that control which IRQ line each of the PCI PIRQ lines are > routed to. Even with a proper PIRQ table these registers are not setup > and I get the same error reported. that's whacky. The old linux did fine with 440bx. I never had to do anything but set up PIRQ tables. > I suggest you diff the output of lspci -xxx for the northbridge between > linubios and factory bios and resolve all the differences with the > datasheet. on the geode 2.4.18 always worked, and if I patched linux for later linuxes, that worked fine too. What a mess PIRQ got to be .... ron _______________________________________________ Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios