On Sun, Sep 02, 2007 at 08:13:24PM +0200, [EMAIL PROTECTED] wrote: > > * what Q4-1, Q5-1, R99-1 and R102-2 connects to on U5, if anything. > > Q4-1 -> U9-CS# > Q5-1 -> U5-CS#
On Sun, Sep 09, 2007 at 11:14:40PM +0200, todthgie wrote: > >> 1. Lift the U5-CS# pin from the board. > > maybe thaere is a resistor of 0 Ohm (maybe R509 ?) between the > Superio and U5? Possible, but someone will have to spend some time checking connections on the board to find it. Really tedious work. It's not R509 though since Q5-1 is U5-CS#, not Q4-3/Q5-3. :\ > it might be easier and a LOT saver to unsorder a resistor the it is > to unsolder a singer soic pin ..... I think lifting a corner pin should be doable for pretty much anyone with a little soldering experience but if you can find a 0 ohm that's great! :) > dont solder a chip to the U9 pads but solder a 8 pin connector to > that pads... then solder a mating connector to the chip(s) Can you suggest some good connector part numbers? Needing a PCB for the chip+connector is no fun either.. //Peter -- linuxbios mailing list [email protected] http://www.linuxbios.org/mailman/listinfo/linuxbios
