On Dec 10, 2007 2:52 PM, yhlu <[EMAIL PROTECTED]> wrote: > > On Dec 10, 2007 1:51 PM, ron minnich <[EMAIL PROTECTED]> wrote: > > On Dec 10, 2007 1:39 PM, yhlu <[EMAIL PROTECTED]> wrote: > > > > > No, you don't need that. I have made it automatically detect that. So > > > you only need the chain that down to superio. > > > if my memory is right, the auto detect is in northbridge.c > > > > oops, forgot you had done that! > > > > So, what should his Config look like? > > northbridge/amd/amdk8/root_complex > device apic_cluster 0 on > chip cpu/amd/socket_F > device apic 0 on end > end > end > device pci_domain 0 on > chip northbridge/amd/amdk8 > device pci 18.0 on # northbridge > # devices on link 0
OK > chip southbridge/broadcom/bcm21000 > device pci 0.0 on end > device pci 1.0 on end > device pci 2.0 on end > device pci 3.0 on end > device pci 4.0 on end > end why do we need all of these? > chip southbridge/broadcom/bcm11000 > device pci 0.0 on end > device pci 1.0 on end > device pci 1.1 on end > device pci 2.0 on end > device pci 2.1 on end > device pci 3.0 on end > device pci 3.1 on end > device pci 4.0 on end > device pci 4.1 on end > device pci 6.0 on end > device pci 6.1 on end > device pci 6.2 on Why do we need all of these? > chip superio/smsc/sch4304 > > device pnp 2e.0 off # Floppy > io 0x60 = 0x3f0 > irq 0x70 = 6 > drq 0x74 = 2 > end > device pnp 2e.3 on # Parallel Port > io 0x60 = 0x378 > irq 0x70 = 7 > end > device pnp 2e.4 on # Com 1 > io 0x60 = 0x3f8 > irq 0x70 = 4 > end > device pnp 2e.5 on # Com 2 > io 0x60 = 0x2f8 > irq 0x70 = 3 > end > device pnp 2e.6 on # RTC > io 0x60 = 0x70 > io 0x62 = 0x72 > end > device pnp 2e.7 on # Keyboard > io 0x60 = 0x60 > io 0x62 = 0x64 > irq 0x70 = 1 > end > #device pnp 2e.7 off > #end > #device pnp 2e.B off > #end > end > end > device pci 6.3 off > end > device pci 6.4 on > end > device pci 6.5 on > end > device pci 6.6 on > end why do we need these? > end # bcm11000 > end # device pci 18.0 > device pci 18.1 on > end > device pci 18.2 on > end > device pci 18.3 on > end do we need these or are they auto discovered thanks ron -- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios
