I tried this config and it got this far (hangs after second SOFT_RESET): LinuxBIOS-2.0.0._apollo_Fallback OBJ-XXXX-XX Mon Dec 10 15:21:11 PST 2007 starting...
(0,1) link=01 (1,0) link=01 02 nodes initialized. core0 started: 01 01 02 03SBLink=00 NC node|link=00 SMBus controller enabled INIT detected from ---- {APICID = 00 NODEID = 00 COREID = 00} --- Issuing SOFT_RESET... (0,1) link=01 (1,0) link=03 02 nodes initialized. core0 started: 01 *01*00000001 *02*00000001 *03*00000001 SBLink=00 NC node|link=00 SMBus controller enabled ht reset - SMBus controller enabled Ram1.00 Ram1.01 Ram2.00 Registered 333Mhz Interleaved RAM: 0x00400000 KB Ram2.01 Registered 333Mhz Interleaved RAM: 0x00800000 KB Ram3 Initializing memory: done Initializing memory: done RAM: 0x00900000 KB Setting variable MTRR 02, base: 0000MB, range: 0800MB, type WB Setting variable MTRR 03, base: 0800MB, range: 0400MB, type WB DQS Training:RcvrEn:Pass1: 00 CTLRMaxDelay=78 done DQS Training:RcvrEn:Pass1: 01 CTLRMaxDelay=12 done DQS Training:DQSPos: 00 done DQS Training:DQSPos: 01 done DQS Training:RcvrEn:Pass2: 00 CTLRMaxDelay=79 done DQS Training:RcvrEn:Pass2: 01 CTLRMaxDelay=43 done DQS Training:tsc[00]=000000071b69c5bc DQS Training:tsc[01]=0000000723387656 DQS Training:tsc[02]=00000007233d3693 DQS Training:tsc[03]=000000081d5816f9 DQS Training:tsc[04]=0000000826dc49ca mem_trained[00]=01 mem_trained[01]=01 Ram4 v_esp=000ceef8 testx = 5a5a5a5a Copying data from cache to ram -- switching to use ram as stack... Done testx = 5a5a5a5a Disabling cache as ram now Clearing initial memory region: INIT detected from ---- {APICID = 00 NODEID = 00 COREID = 00} --- Issuing SOFT_RESET... On Mon, 2007-12-10 at 14:52 -0800, yhlu wrote: > northbridge/amd/amdk8/root_complex > device apic_cluster 0 on > chip cpu/amd/socket_F > device apic 0 on end > end > end > device pci_domain 0 on > chip northbridge/amd/amdk8 > device pci 18.0 on # northbridge > # devices on link 0 > chip southbridge/broadcom/bcm21000 > device pci 0.0 on end > device pci 1.0 on end > device pci 2.0 on end > device pci 3.0 on end > device pci 4.0 on end > end > chip southbridge/broadcom/bcm11000 > device pci 0.0 on end > device pci 1.0 on end > device pci 1.1 on end > device pci 2.0 on end > device pci 2.1 on end > device pci 3.0 on end > device pci 3.1 on end > device pci 4.0 on end > device pci 4.1 on end > device pci 6.0 on end > device pci 6.1 on end > device pci 6.2 on > chip superio/smsc/sch4304 > device pnp 2e.0 off # Floppy > io 0x60 = 0x3f0 > irq 0x70 = 6 > drq 0x74 = 2 > end > device pnp 2e.3 on # Parallel Port > io 0x60 = 0x378 > irq 0x70 = 7 > end > device pnp 2e.4 on # Com 1 > io 0x60 = 0x3f8 > irq 0x70 = 4 > end > device pnp 2e.5 on # Com 2 > io 0x60 = 0x2f8 > irq 0x70 = 3 > end > device pnp 2e.6 on # RTC > io 0x60 = 0x70 > io 0x62 = 0x72 > end > device pnp 2e.7 on # Keyboard > io 0x60 = 0x60 > io 0x62 = 0x64 > irq 0x70 = 1 > end > #device pnp 2e.7 off > #end > #device pnp 2e.B off > #end > end > end > device pci 6.3 off > end > device pci 6.4 on > end > device pci 6.5 on > end > device pci 6.6 on > end > end # bcm11000 > end # device pci 18.0 > device pci 18.1 on > end > device pci 18.2 on > end > device pci 18.3 on > end > end > end #pci_domain > end -- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios