On Dec 10, 2007 3:03 PM, ron minnich <[EMAIL PROTECTED]> wrote: > On Dec 10, 2007 2:52 PM, yhlu <[EMAIL PROTECTED]> wrote: > > > > On Dec 10, 2007 1:51 PM, ron minnich <[EMAIL PROTECTED]> wrote: > > > On Dec 10, 2007 1:39 PM, yhlu <[EMAIL PROTECTED]> wrote: > > > > > > > No, you don't need that. I have made it automatically detect that. So > > > > you only need the chain that down to superio. > > > > if my memory is right, the auto detect is in northbridge.c > > > > > > oops, forgot you had done that! > > > > > > So, what should his Config look like? > > > > northbridge/amd/amdk8/root_complex > > device apic_cluster 0 on > > chip cpu/amd/socket_F > > device apic 0 on end > > end > > end > > device pci_domain 0 on > > chip northbridge/amd/amdk8 > > device pci 18.0 on # northbridge > > # devices on link 0 > > OK > > > chip southbridge/broadcom/bcm21000 > > device pci 0.0 on end > > device pci 1.0 on end > > device pci 2.0 on end > > device pci 3.0 on end > > device pci 4.0 on end > > end > > why do we need all of these? > > chip southbridge/broadcom/bcm11000 > > device pci 0.0 on end > > device pci 1.0 on end > > device pci 1.1 on end > > device pci 2.0 on end > > device pci 2.1 on end > > device pci 3.0 on end > > device pci 3.1 on end > > device pci 4.0 on end > > device pci 4.1 on end > > device pci 6.0 on end > > device pci 6.1 on end > > device pci 6.2 on > > Why do we need all of these? > > > > chip superio/smsc/sch4304 > > > > device pnp 2e.0 off # Floppy > > io 0x60 = 0x3f0 > > irq 0x70 = 6 > > drq 0x74 = 2 > > end > > device pnp 2e.3 on # Parallel Port > > io 0x60 = 0x378 > > irq 0x70 = 7 > > end > > device pnp 2e.4 on # Com 1 > > io 0x60 = 0x3f8 > > irq 0x70 = 4 > > end > > device pnp 2e.5 on # Com 2 > > io 0x60 = 0x2f8 > > irq 0x70 = 3 > > end > > device pnp 2e.6 on # RTC > > io 0x60 = 0x70 > > io 0x62 = 0x72 > > end > > device pnp 2e.7 on # Keyboard > > io 0x60 = 0x60 > > io 0x62 = 0x64 > > irq 0x70 = 1 > > end > > #device pnp 2e.7 off > > #end > > #device pnp 2e.B off > > #end > > end > > end > > > device pci 6.3 off > > end > > device pci 6.4 on > > end > > device pci 6.5 on > > end > > device pci 6.6 on > > end > > why do we need these? > > > end # bcm11000 > > end # device pci 18.0 > > > device pci 18.1 on > > end > > device pci 18.2 on > > end > > device pci 18.3 on > > end > > do we need these or are they auto discovered
you could remove them. but in case you may need to set it to off to disable some devices ... if sb code support that. YH -- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios
