check /sbin/ipfwadm -F -l and see if the rules are set. Then make sure you have a rule with (m) from the internal net to 0.0.0.0 (if you're masq to everywhere) My question is for an RH 5.0 server. My firewalling rules won't set-up on Linuxconf exit. I have all the rules set and this worked previously and still works on my other machines. I never get the ipfwadm rules in the preview list on exit. I have ipfwadm 2.3.0-1. Linuxconf --update doesn't do it either. don Jason Wilson wrote: > I have a RH5.1 server with masquerading set up on it. It will not > masquerade though. I have another 5.1 machine almost identical except it is > running snmp and works and the other machine is not. Is snmp critical for > masquerading and if so how do I load it. > > Also a possible addition for linuxconf. What about adding a module to > function the same as glint. If you are running x-windows glint is fine but > if you are running command line it doesn't work real well =-). > > Thanks > > --- > You are currently subscribed to linuxconf as: [EMAIL PROTECTED] > To unsubscribe, forward this message to [EMAIL PROTECTED] --- You are currently subscribed to linuxconf as: [[email protected]] To unsubscribe, forward this message to [EMAIL PROTECTED]
