On Tue, Jan 08, 2008 at 09:01:30AM -0700, John Rigby wrote: > + [EMAIL PROTECTED] { > + device_type = "board-control"; > + reg = <82000000 8000>; > + };
Should be: [EMAIL PROTECTED] { compatible = "fsl,mpc5121ads-cpld"; reg = <82000000 8000>; }; > + ref-frequency = <3ef1480>; // 66MHz ref > + bus-frequency = <5e69ec0>; // 99MHz ips ref Please specify these in decimal rather than hex (using the d# prefix, or better yet /dts-v1/). > + // IPIC > + // interrupts cell = <intr #, sense> > + // sense values match linux IORESOURCE_IRQ_* defines: > + // sense == 8: Level, low assertion > + // sense == 2: Edge, high-to-low change > + // > + ipic: [EMAIL PROTECTED] { > + interrupt-controller; > + #address-cells = <0>; > + #interrupt-cells = <2>; > + reg = <c00 100>; > + built-in; > + device_type = "ipic"; > + }; Remove built-in. -Scott _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev