On Tue, Mar 14, 2017 at 11:51 AM, Michael Ellerman <m...@ellerman.id.au> wrote:
> Michael Ellerman <m...@ellerman.id.au> writes:
>
>> We'd like to eventually remove NO_IRQ on powerpc, so remove usages of it
>> from electra_cf.c which is a powerpc-only driver.
>>
>> Signed-off-by: Michael Ellerman <m...@ellerman.id.au>
>> ---
>> drivers/pcmcia/electra_cf.c | 4 ++--
>> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> Ping anyone?
>
> Or should I merge this via the powerpc tree?
That's what I would recommend for a powerpc specific pcmcia driver, yes.
Looking at the bigger picture of powerpc drivers using NO_IRQ, I also
see these others:
drivers/ata/pata_mpc52xx.c: if (ata_irq == NO_IRQ) {
drivers/ata/sata_dwc_460ex.c:#ifndef NO_IRQ
drivers/ata/sata_dwc_460ex.c:#define NO_IRQ 0
drivers/ata/sata_dwc_460ex.c: if (hsdev->dma->irq == NO_IRQ) {
drivers/ata/sata_dwc_460ex.c: if (irq == NO_IRQ) {
drivers/iommu/fsl_pamu.c: if (irq == NO_IRQ) {
drivers/iommu/fsl_pamu.c: if (irq != NO_IRQ)
drivers/media/platform/fsl-viu.c: if (viu_irq == NO_IRQ) {
drivers/mtd/nand/mpc5121_nfc.c: if (prv->irq == NO_IRQ) {
drivers/pcmcia/electra_cf.c: cf->irq = NO_IRQ;
drivers/pcmcia/electra_cf.c: if (cf->irq != NO_IRQ)
drivers/soc/fsl/qe/qe_ic.c:/* Return an interrupt vector or NO_IRQ if
no interrupt is pending. */
drivers/soc/fsl/qe/qe_ic.c: return NO_IRQ;
drivers/soc/fsl/qe/qe_ic.c:/* Return an interrupt vector or NO_IRQ if
no interrupt is pending. */
drivers/soc/fsl/qe/qe_ic.c: return NO_IRQ;
drivers/soc/fsl/qe/qe_ic.c: if (qe_ic->virq_low == NO_IRQ) {
drivers/soc/fsl/qe/qe_ic.c: if (qe_ic->virq_high != NO_IRQ &&
drivers/spi/spi-mpc52xx.c: if (status && (irq != NO_IRQ))
drivers/tty/ehv_bytechan.c: if (stdout_irq == NO_IRQ) {
drivers/tty/ehv_bytechan.c: if ((bc->rx_irq == NO_IRQ) ||
(bc->tx_irq == NO_IRQ)) {
drivers/tty/serial/cpm_uart/cpm_uart_core.c: if (pinfo->port.irq == NO_IRQ) {
drivers/uio/uio_fsl_elbc_gpcm.c: if (irq != NO_IRQ) {
drivers/uio/uio_fsl_elbc_gpcm.c: irq = NO_IRQ;
drivers/uio/uio_fsl_elbc_gpcm.c: irq != NO_IRQ ? irq : -1);
drivers/usb/host/ehci-grlib.c: if (irq == NO_IRQ) {
drivers/usb/host/ehci-ppc-of.c: if (irq == NO_IRQ) {
drivers/usb/host/fhci-hcd.c: if (usb_irq == NO_IRQ) {
drivers/usb/host/ohci-ppc-of.c: if (irq == NO_IRQ) {
drivers/usb/host/uhci-grlib.c: if (irq == NO_IRQ) {
drivers/video/fbdev/mb862xx/mb862xxfbdrv.c: if (par->irq == NO_IRQ) {
drivers/virt/fsl_hypervisor.c: if (!handle || (irq == NO_IRQ)) {
include/soc/fsl/qe/qe_ic.h: if (cascade_irq != NO_IRQ)
include/soc/fsl/qe/qe_ic.h: if (cascade_irq != NO_IRQ)
include/soc/fsl/qe/qe_ic.h: if (cascade_irq != NO_IRQ)
include/soc/fsl/qe/qe_ic.h: if (cascade_irq != NO_IRQ)
include/soc/fsl/qe/qe_ic.h: if (cascade_irq == NO_IRQ)
include/soc/fsl/qe/qe_ic.h: if (cascade_irq != NO_IRQ)
Did you have other pending patches for those?
Arnd
