Move mpc834x_mds device tree source forward to dts-v1 format. Nothing too complex in this one, so it boils down to just adding a bunch of 0x in the right places and converting clock speeds to decimal.
Signed-off-by: Paul Gortmaker <[EMAIL PROTECTED]> --- arch/powerpc/boot/dts/mpc834x_mds.dts | 254 +++++++++++++++++---------------- 1 files changed, 128 insertions(+), 126 deletions(-) diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts index 4120e92..537a77c 100644 --- a/arch/powerpc/boot/dts/mpc834x_mds.dts +++ b/arch/powerpc/boot/dts/mpc834x_mds.dts @@ -9,6 +9,8 @@ * option) any later version. */ +/dts-v1/; + / { model = "MPC8349EMDS"; compatible = "MPC8349EMDS", "MPC834xMDS", "MPC83xxMDS"; @@ -31,10 +33,10 @@ PowerPC,[EMAIL PROTECTED] { device_type = "cpu"; reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <32768>; // L1, 32K + i-cache-size = <32768>; // L1, 32K timebase-frequency = <0>; // from bootloader bus-frequency = <0>; // from bootloader clock-frequency = <0>; // from bootloader @@ -43,26 +45,26 @@ memory { device_type = "memory"; - reg = <00000000 10000000>; // 256MB at 0 + reg = <0x00000000 0x10000000>; // 256MB at 0 }; [EMAIL PROTECTED] { device_type = "board-control"; - reg = <e2400000 8000>; + reg = <0xe2400000 0x8000>; }; [EMAIL PROTECTED] { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = <e0000000 00000200>; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; bus-frequency = <0>; [EMAIL PROTECTED] { device_type = "watchdog"; compatible = "mpc83xx_wdt"; - reg = <200 100>; + reg = <0x200 0x100>; }; [EMAIL PROTECTED] { @@ -70,14 +72,14 @@ #size-cells = <0>; cell-index = <0>; compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = <e 8>; - interrupt-parent = < &ipic >; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; dfsrr; [EMAIL PROTECTED] { compatible = "dallas,ds1374"; - reg = <68>; + reg = <0x68>; }; }; @@ -86,41 +88,41 @@ #size-cells = <0>; cell-index = <1>; compatible = "fsl-i2c"; - reg = <3100 100>; - interrupts = <f 8>; - interrupt-parent = < &ipic >; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; dfsrr; }; [EMAIL PROTECTED] { device_type = "spi"; compatible = "fsl_spi"; - reg = <7000 1000>; - interrupts = <10 8>; - interrupt-parent = < &ipic >; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; mode = "cpu"; }; - /* phy type (ULPI or SERIAL) are only types supportted for MPH */ + /* phy type (ULPI or SERIAL) are only types supported for MPH */ /* port = 0 or 1 */ [EMAIL PROTECTED] { compatible = "fsl-usb2-mph"; - reg = <22000 1000>; + reg = <0x22000 0x1000>; #address-cells = <1>; #size-cells = <0>; - interrupt-parent = < &ipic >; - interrupts = <27 8>; + interrupt-parent = <&ipic>; + interrupts = <39 0x8>; phy_type = "ulpi"; port1; }; /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ [EMAIL PROTECTED] { compatible = "fsl-usb2-dr"; - reg = <23000 1000>; + reg = <0x23000 0x1000>; #address-cells = <1>; #size-cells = <0>; - interrupt-parent = < &ipic >; - interrupts = <26 8>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; dr_mode = "otg"; phy_type = "ulpi"; }; @@ -129,18 +131,18 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-mdio"; - reg = <24520 20>; + reg = <0x24520 0x20>; phy0: [EMAIL PROTECTED] { - interrupt-parent = < &ipic >; - interrupts = <11 8>; - reg = <0>; + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x0>; device_type = "ethernet-phy"; }; phy1: [EMAIL PROTECTED] { - interrupt-parent = < &ipic >; - interrupts = <12 8>; - reg = <1>; + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x1>; device_type = "ethernet-phy"; }; }; @@ -150,11 +152,11 @@ device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <24000 1000>; + reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <20 8 21 8 22 8>; - interrupt-parent = < &ipic >; - phy-handle = < &phy0 >; + interrupts = <32 0x8 33 0x8 34 0x8>; + interrupt-parent = <&ipic>; + phy-handle = <&phy0>; linux,network-index = <0>; }; @@ -163,11 +165,11 @@ device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <25000 1000>; + reg = <0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <23 8 24 8 25 8>; - interrupt-parent = < &ipic >; - phy-handle = < &phy1 >; + interrupts = <35 0x8 36 0x8 37 0x8>; + interrupt-parent = <&ipic>; + phy-handle = <&phy1>; linux,network-index = <1>; }; @@ -175,20 +177,20 @@ cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; + reg = <0x4500 0x100>; clock-frequency = <0>; - interrupts = <9 8>; - interrupt-parent = < &ipic >; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; }; serial1: [EMAIL PROTECTED] { cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; + reg = <0x4600 0x100>; clock-frequency = <0>; - interrupts = <a 8>; - interrupt-parent = < &ipic >; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; }; /* May need to remove if on a part without crypto engine */ @@ -196,15 +198,15 @@ device_type = "crypto"; model = "SEC2"; compatible = "talitos"; - reg = <30000 10000>; - interrupts = <b 8>; - interrupt-parent = < &ipic >; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; num-channels = <4>; - channel-fifo-len = <18>; - exec-units-mask = <0000007e>; + channel-fifo-len = <0x18>; + exec-units-mask = <0x0000007e>; /* desc mask is for rev2.0, * we need runtime fixup for >2.0 */ - descriptor-types-mask = <01010ebf>; + descriptor-types-mask = <0x01010ebf>; }; /* IPIC @@ -217,129 +219,129 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <700 100>; + reg = <0x700 0x100>; device_type = "ipic"; }; }; pci0: [EMAIL PROTECTED] { cell-index = <1>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x11 */ - 8800 0 0 1 &ipic 14 8 - 8800 0 0 2 &ipic 15 8 - 8800 0 0 3 &ipic 16 8 - 8800 0 0 4 &ipic 17 8 + 0x8800 0x0 0x0 0x1 &ipic 20 0x8 + 0x8800 0x0 0x0 0x2 &ipic 21 0x8 + 0x8800 0x0 0x0 0x3 &ipic 22 0x8 + 0x8800 0x0 0x0 0x4 &ipic 23 0x8 /* IDSEL 0x12 */ - 9000 0 0 1 &ipic 16 8 - 9000 0 0 2 &ipic 17 8 - 9000 0 0 3 &ipic 14 8 - 9000 0 0 4 &ipic 15 8 + 0x9000 0x0 0x0 0x1 &ipic 22 0x8 + 0x9000 0x0 0x0 0x2 &ipic 23 0x8 + 0x9000 0x0 0x0 0x3 &ipic 20 0x8 + 0x9000 0x0 0x0 0x4 &ipic 21 0x8 /* IDSEL 0x13 */ - 9800 0 0 1 &ipic 17 8 - 9800 0 0 2 &ipic 14 8 - 9800 0 0 3 &ipic 15 8 - 9800 0 0 4 &ipic 16 8 + 0x9800 0x0 0x0 0x1 &ipic 23 0x8 + 0x9800 0x0 0x0 0x2 &ipic 20 0x8 + 0x9800 0x0 0x0 0x3 &ipic 21 0x8 + 0x9800 0x0 0x0 0x4 &ipic 22 0x8 /* IDSEL 0x15 */ - a800 0 0 1 &ipic 14 8 - a800 0 0 2 &ipic 15 8 - a800 0 0 3 &ipic 16 8 - a800 0 0 4 &ipic 17 8 + 0xa800 0x0 0x0 0x1 &ipic 20 0x8 + 0xa800 0x0 0x0 0x2 &ipic 21 0x8 + 0xa800 0x0 0x0 0x3 &ipic 22 0x8 + 0xa800 0x0 0x0 0x4 &ipic 23 0x8 /* IDSEL 0x16 */ - b000 0 0 1 &ipic 17 8 - b000 0 0 2 &ipic 14 8 - b000 0 0 3 &ipic 15 8 - b000 0 0 4 &ipic 16 8 + 0xb000 0x0 0x0 0x1 &ipic 23 0x8 + 0xb000 0x0 0x0 0x2 &ipic 20 0x8 + 0xb000 0x0 0x0 0x3 &ipic 21 0x8 + 0xb000 0x0 0x0 0x4 &ipic 22 0x8 /* IDSEL 0x17 */ - b800 0 0 1 &ipic 16 8 - b800 0 0 2 &ipic 17 8 - b800 0 0 3 &ipic 14 8 - b800 0 0 4 &ipic 15 8 + 0xb800 0x0 0x0 0x1 &ipic 22 0x8 + 0xb800 0x0 0x0 0x2 &ipic 23 0x8 + 0xb800 0x0 0x0 0x3 &ipic 20 0x8 + 0xb800 0x0 0x0 0x4 &ipic 21 0x8 /* IDSEL 0x18 */ - c000 0 0 1 &ipic 15 8 - c000 0 0 2 &ipic 16 8 - c000 0 0 3 &ipic 17 8 - c000 0 0 4 &ipic 14 8>; - interrupt-parent = < &ipic >; - interrupts = <42 8>; + 0xc000 0x0 0x0 0x1 &ipic 21 0x8 + 0xc000 0x0 0x0 0x2 &ipic 22 0x8 + 0xc000 0x0 0x0 0x3 &ipic 23 0x8 + 0xc000 0x0 0x0 0x4 &ipic 20 0x8>; + interrupt-parent = <&ipic>; + interrupts = <0x42 0x8>; bus-range = <0 0>; - ranges = <02000000 0 90000000 90000000 0 10000000 - 42000000 0 80000000 80000000 0 10000000 - 01000000 0 00000000 e2000000 0 00100000>; - clock-frequency = <3f940aa>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0008500 100>; + reg = <0xe0008500 0x100>; compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; pci1: [EMAIL PROTECTED] { cell-index = <2>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x11 */ - 8800 0 0 1 &ipic 14 8 - 8800 0 0 2 &ipic 15 8 - 8800 0 0 3 &ipic 16 8 - 8800 0 0 4 &ipic 17 8 + 0x8800 0x0 0x0 0x1 &ipic 20 0x8 + 0x8800 0x0 0x0 0x2 &ipic 21 0x8 + 0x8800 0x0 0x0 0x3 &ipic 22 0x8 + 0x8800 0x0 0x0 0x4 &ipic 23 0x8 /* IDSEL 0x12 */ - 9000 0 0 1 &ipic 16 8 - 9000 0 0 2 &ipic 17 8 - 9000 0 0 3 &ipic 14 8 - 9000 0 0 4 &ipic 15 8 + 0x9000 0x0 0x0 0x1 &ipic 22 0x8 + 0x9000 0x0 0x0 0x2 &ipic 23 0x8 + 0x9000 0x0 0x0 0x3 &ipic 20 0x8 + 0x9000 0x0 0x0 0x4 &ipic 21 0x8 /* IDSEL 0x13 */ - 9800 0 0 1 &ipic 17 8 - 9800 0 0 2 &ipic 14 8 - 9800 0 0 3 &ipic 15 8 - 9800 0 0 4 &ipic 16 8 + 0x9800 0x0 0x0 0x1 &ipic 23 0x8 + 0x9800 0x0 0x0 0x2 &ipic 20 0x8 + 0x9800 0x0 0x0 0x3 &ipic 21 0x8 + 0x9800 0x0 0x0 0x4 &ipic 22 0x8 /* IDSEL 0x15 */ - a800 0 0 1 &ipic 14 8 - a800 0 0 2 &ipic 15 8 - a800 0 0 3 &ipic 16 8 - a800 0 0 4 &ipic 17 8 + 0xa800 0x0 0x0 0x1 &ipic 20 0x8 + 0xa800 0x0 0x0 0x2 &ipic 21 0x8 + 0xa800 0x0 0x0 0x3 &ipic 22 0x8 + 0xa800 0x0 0x0 0x4 &ipic 23 0x8 /* IDSEL 0x16 */ - b000 0 0 1 &ipic 17 8 - b000 0 0 2 &ipic 14 8 - b000 0 0 3 &ipic 15 8 - b000 0 0 4 &ipic 16 8 + 0xb000 0x0 0x0 0x1 &ipic 23 0x8 + 0xb000 0x0 0x0 0x2 &ipic 20 0x8 + 0xb000 0x0 0x0 0x3 &ipic 21 0x8 + 0xb000 0x0 0x0 0x4 &ipic 22 0x8 /* IDSEL 0x17 */ - b800 0 0 1 &ipic 16 8 - b800 0 0 2 &ipic 17 8 - b800 0 0 3 &ipic 14 8 - b800 0 0 4 &ipic 15 8 + 0xb800 0x0 0x0 0x1 &ipic 22 0x8 + 0xb800 0x0 0x0 0x2 &ipic 23 0x8 + 0xb800 0x0 0x0 0x3 &ipic 20 0x8 + 0xb800 0x0 0x0 0x4 &ipic 21 0x8 /* IDSEL 0x18 */ - c000 0 0 1 &ipic 15 8 - c000 0 0 2 &ipic 16 8 - c000 0 0 3 &ipic 17 8 - c000 0 0 4 &ipic 14 8>; - interrupt-parent = < &ipic >; - interrupts = <42 8>; + 0xc000 0x0 0x0 0x1 &ipic 21 0x8 + 0xc000 0x0 0x0 0x2 &ipic 22 0x8 + 0xc000 0x0 0x0 0x3 &ipic 23 0x8 + 0xc000 0x0 0x0 0x4 &ipic 20 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; bus-range = <0 0>; - ranges = <02000000 0 b0000000 b0000000 0 10000000 - 42000000 0 a0000000 a0000000 0 10000000 - 01000000 0 00000000 e2100000 0 00100000>; - clock-frequency = <3f940aa>; + ranges = <0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000 + 0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2100000 0x0 0x00100000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0008600 100>; + reg = <0xe0008600 0x100>; compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; -- 1.5.4.rc4.gcab31 _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev