Dear Geert, In message <[EMAIL PROTECTED]> you wrote: > > Can you actually boot a plain uImage from U-Boot?
yes, of course you can (you will need a device tree, too). > I've just gave it a try. While arch/powerpc/boot/cuImage.sequoia boots fine, > after `make uImage', I get arch/powerpc/boot/uImage, but it doesn't boot: > > | ## Booting image at 00100000 ... > | Image Name: Linux-2.6.27-rc4-dirty > | Image Type: PowerPC Linux Kernel Image (gzip compressed) > | Data Size: 1398827 Bytes = 1.3 MB > | Load Address: 00000000 > | Entry Point: 00000000 > | Verifying Checksum ... OK > | Uncompressing Kernel Image ... Error: inflate() returned -3 > | GUNZIP ERROR - must RESET board to recover > | > | U-Boot 1.2.0-gc0c292b2 (Jun 5 2007 - 07:16:12) > > and I'm back to U-Boot... See the FAQ: http://www.denx.de/wiki/view/DULG/LinuxUncompressingError Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] A conservative is a man who believes that nothing should be done for the first time. - Alfred E. Wiggam _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev