From: "J. Neuschäfer" <[email protected]> This increases readability, because "0x8" isn't very descriptive.
mpc8313erdb.dtb remains identical after this patch. Signed-off-by: J. Neuschäfer <[email protected]> --- arch/powerpc/boot/dts/mpc8313erdb.dts | 59 ++++++++++++++++++++--------------- 1 file changed, 34 insertions(+), 25 deletions(-) diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts index 09508b4c8c7309..137217d377e91b 100644 --- a/arch/powerpc/boot/dts/mpc8313erdb.dts +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -6,6 +6,7 @@ */ /dts-v1/; +#include <dt-bindings/interrupt-controller/irq.h> / { model = "MPC8313ERDB"; @@ -48,7 +49,7 @@ localbus@e0005000 { #size-cells = <1>; compatible = "fsl,mpc8313-elbc", "fsl,elbc", "simple-bus"; reg = <0xe0005000 0x1000>; - interrupts = <77 0x8>; + interrupts = <77 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&ipic>; // CS0 and CS1 are swapped when @@ -118,7 +119,7 @@ i2c@3000 { cell-index = <0>; compatible = "fsl-i2c"; reg = <0x3000 0x100>; - interrupts = <14 0x8>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&ipic>; dfsrr; rtc@68 { @@ -131,7 +132,7 @@ crypto@30000 { compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; reg = <0x30000 0x10000>; - interrupts = <11 0x8>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&ipic>; fsl,num-channels = <1>; fsl,channel-fifo-len = <24>; @@ -146,7 +147,7 @@ i2c@3100 { cell-index = <1>; compatible = "fsl-i2c"; reg = <0x3100 0x100>; - interrupts = <15 0x8>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&ipic>; dfsrr; }; @@ -155,7 +156,7 @@ spi@7000 { cell-index = <0>; compatible = "fsl,spi"; reg = <0x7000 0x1000>; - interrupts = <16 0x8>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&ipic>; mode = "cpu"; }; @@ -167,7 +168,7 @@ usb@23000 { #address-cells = <1>; #size-cells = <0>; interrupt-parent = <&ipic>; - interrupts = <38 0x8>; + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; phy_type = "utmi_wide"; sleep = <&pmc 0x00300000>; }; @@ -175,7 +176,8 @@ usb@23000 { ptp_clock@24E00 { compatible = "fsl,etsec-ptp"; reg = <0x24E00 0xB0>; - interrupts = <12 0x8 13 0x8>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>, + <13 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = < &ipic >; fsl,tclk-period = <10>; fsl,tmr-prsc = <100>; @@ -197,7 +199,9 @@ enet0: ethernet@24000 { compatible = "gianfar"; reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <37 0x8 36 0x8 35 0x8>; + interrupts = <37 IRQ_TYPE_LEVEL_LOW>, + <36 IRQ_TYPE_LEVEL_LOW>, + <35 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&ipic>; tbi-handle = < &tbi0 >; /* Vitesse 7385 isn't on the MDIO bus */ @@ -211,7 +215,7 @@ mdio@520 { reg = <0x520 0x20>; phy4: ethernet-phy@4 { interrupt-parent = <&ipic>; - interrupts = <20 0x8>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; reg = <0x4>; }; tbi0: tbi-phy@11 { @@ -231,7 +235,9 @@ enet1: ethernet@25000 { reg = <0x25000 0x1000>; ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <34 0x8 33 0x8 32 0x8>; + interrupts = <34 IRQ_TYPE_LEVEL_LOW>, + <33 IRQ_TYPE_LEVEL_LOW>, + <32 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&ipic>; tbi-handle = < &tbi1 >; phy-handle = < &phy4 >; @@ -259,7 +265,7 @@ serial0: serial@4500 { compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; - interrupts = <9 0x8>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&ipic>; }; @@ -269,15 +275,12 @@ serial1: serial@4600 { compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; - interrupts = <10 0x8>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&ipic>; }; /* IPIC - * interrupts cell = <intr #, sense> - * sense values match linux IORESOURCE_IRQ_* defines: - * sense == 8: Level, low assertion - * sense == 2: Edge, high-to-low change + * interrupts cell = <intr #, type> */ ipic: pic@700 { interrupt-controller; @@ -290,7 +293,7 @@ ipic: pic@700 { pmc: power@b00 { compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc"; reg = <0xb00 0x100 0xa00 0x100>; - interrupts = <80 8>; + interrupts = <80 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&ipic>; fsl,mpc8313-wakeup-timer = <>m1>; @@ -306,14 +309,20 @@ pmc: power@b00 { gtm1: timer@500 { compatible = "fsl,mpc8313-gtm", "fsl,gtm"; reg = <0x500 0x100>; - interrupts = <90 8 78 8 84 8 72 8>; + interrupts = <90 IRQ_TYPE_LEVEL_LOW>, + <78 IRQ_TYPE_LEVEL_LOW>, + <84 IRQ_TYPE_LEVEL_LOW>, + <72 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&ipic>; }; timer@600 { compatible = "fsl,mpc8313-gtm", "fsl,gtm"; reg = <0x600 0x100>; - interrupts = <91 8 79 8 85 8 73 8>; + interrupts = <91 IRQ_TYPE_LEVEL_LOW>, + <79 IRQ_TYPE_LEVEL_LOW>, + <85 IRQ_TYPE_LEVEL_LOW>, + <73 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&ipic>; }; }; @@ -341,7 +350,7 @@ pci0: pci@e0008500 { 0x7800 0x0 0x0 0x3 &ipic 17 0x8 0x7800 0x0 0x0 0x4 &ipic 18 0x8>; interrupt-parent = <&ipic>; - interrupts = <66 0x8>; + interrupts = <66 IRQ_TYPE_LEVEL_LOW>; bus-range = <0x0 0x0>; ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 @@ -363,14 +372,14 @@ dma@82a8 { reg = <0xe00082a8 4>; ranges = <0 0xe0008100 0x1a8>; interrupt-parent = <&ipic>; - interrupts = <71 8>; + interrupts = <71 IRQ_TYPE_LEVEL_LOW>; dma-channel@0 { compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel"; reg = <0 0x28>; interrupt-parent = <&ipic>; - interrupts = <71 8>; + interrupts = <71 IRQ_TYPE_LEVEL_LOW>; cell-index = <0>; }; @@ -379,7 +388,7 @@ dma-channel@80 { "fsl,elo-dma-channel"; reg = <0x80 0x28>; interrupt-parent = <&ipic>; - interrupts = <71 8>; + interrupts = <71 IRQ_TYPE_LEVEL_LOW>; cell-index = <1>; }; @@ -388,7 +397,7 @@ dma-channel@100 { "fsl,elo-dma-channel"; reg = <0x100 0x28>; interrupt-parent = <&ipic>; - interrupts = <71 8>; + interrupts = <71 IRQ_TYPE_LEVEL_LOW>; cell-index = <2>; }; @@ -397,7 +406,7 @@ dma-channel@180 { "fsl,elo-dma-channel"; reg = <0x180 0x28>; interrupt-parent = <&ipic>; - interrupts = <71 8>; + interrupts = <71 IRQ_TYPE_LEVEL_LOW>; cell-index = <3>; }; }; -- 2.51.0
