From: "J. Neuschäfer" <[email protected]> This increases readability, because "0x8" isn't very descriptive.
mpc8315erdb.dtb remains identical after this patch. Signed-off-by: J. Neuschäfer <[email protected]> --- arch/powerpc/boot/dts/mpc8315erdb.dts | 111 ++++++++++++++++++---------------- 1 file changed, 59 insertions(+), 52 deletions(-) diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts index a8f68d6e50b0dd..1957b6687b2987 100644 --- a/arch/powerpc/boot/dts/mpc8315erdb.dts +++ b/arch/powerpc/boot/dts/mpc8315erdb.dts @@ -50,7 +50,7 @@ localbus@e0005000 { #size-cells = <1>; compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus"; reg = <0xe0005000 0x1000>; - interrupts = <77 0x8>; + interrupts = <77 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&ipic>; // CS0 and CS1 are swapped when @@ -112,7 +112,7 @@ i2c@3000 { cell-index = <0>; compatible = "fsl-i2c"; reg = <0x3000 0x100>; - interrupts = <14 0x8>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&ipic>; dfsrr; rtc@68 { @@ -133,7 +133,7 @@ spi@7000 { cell-index = <0>; compatible = "fsl,spi"; reg = <0x7000 0x1000>; - interrupts = <16 0x8>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&ipic>; mode = "cpu"; }; @@ -145,35 +145,35 @@ dma@82a8 { reg = <0x82a8 4>; ranges = <0 0x8100 0x1a8>; interrupt-parent = <&ipic>; - interrupts = <71 8>; + interrupts = <71 IRQ_TYPE_LEVEL_LOW>; cell-index = <0>; dma-channel@0 { compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel"; reg = <0 0x80>; cell-index = <0>; interrupt-parent = <&ipic>; - interrupts = <71 8>; + interrupts = <71 IRQ_TYPE_LEVEL_LOW>; }; dma-channel@80 { compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel"; reg = <0x80 0x80>; cell-index = <1>; interrupt-parent = <&ipic>; - interrupts = <71 8>; + interrupts = <71 IRQ_TYPE_LEVEL_LOW>; }; dma-channel@100 { compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel"; reg = <0x100 0x80>; cell-index = <2>; interrupt-parent = <&ipic>; - interrupts = <71 8>; + interrupts = <71 IRQ_TYPE_LEVEL_LOW>; }; dma-channel@180 { compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel"; reg = <0x180 0x28>; cell-index = <3>; interrupt-parent = <&ipic>; - interrupts = <71 8>; + interrupts = <71 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -183,7 +183,7 @@ usb@23000 { #address-cells = <1>; #size-cells = <0>; interrupt-parent = <&ipic>; - interrupts = <38 0x8>; + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; phy_type = "utmi"; }; @@ -197,7 +197,9 @@ enet0: ethernet@24000 { reg = <0x24000 0x1000>; ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <32 0x8 33 0x8 34 0x8>; + interrupts = <32 IRQ_TYPE_LEVEL_LOW>, + <33 IRQ_TYPE_LEVEL_LOW>, + <34 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&ipic>; tbi-handle = <&tbi0>; phy-handle = < &phy0 >; @@ -238,7 +240,9 @@ enet1: ethernet@25000 { reg = <0x25000 0x1000>; ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 0x8 36 0x8 37 0x8>; + interrupts = <35 IRQ_TYPE_LEVEL_LOW>, + <36 IRQ_TYPE_LEVEL_LOW>, + <37 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&ipic>; tbi-handle = <&tbi1>; phy-handle = < &phy1 >; @@ -263,7 +267,7 @@ serial0: serial@4500 { compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <133333333>; - interrupts = <9 0x8>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&ipic>; }; @@ -273,7 +277,7 @@ serial1: serial@4600 { compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <133333333>; - interrupts = <10 0x8>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&ipic>; }; @@ -282,7 +286,7 @@ crypto@30000 { "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; reg = <0x30000 0x10000>; - interrupts = <11 0x8>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&ipic>; fsl,num-channels = <4>; fsl,channel-fifo-len = <24>; @@ -294,7 +298,7 @@ sata@18000 { compatible = "fsl,mpc8315-sata", "fsl,pq-sata"; reg = <0x18000 0x1000>; cell-index = <1>; - interrupts = <44 0x8>; + interrupts = <44 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&ipic>; }; @@ -302,14 +306,17 @@ sata@19000 { compatible = "fsl,mpc8315-sata", "fsl,pq-sata"; reg = <0x19000 0x1000>; cell-index = <2>; - interrupts = <45 0x8>; + interrupts = <45 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&ipic>; }; gtm1: timer@500 { compatible = "fsl,mpc8315-gtm", "fsl,gtm"; reg = <0x500 0x100>; - interrupts = <90 8 78 8 84 8 72 8>; + interrupts = <90 IRQ_TYPE_LEVEL_LOW>, + <78 IRQ_TYPE_LEVEL_LOW>, + <84 IRQ_TYPE_LEVEL_LOW>, + <72 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&ipic>; clock-frequency = <133333333>; }; @@ -317,16 +324,16 @@ gtm1: timer@500 { timer@600 { compatible = "fsl,mpc8315-gtm", "fsl,gtm"; reg = <0x600 0x100>; - interrupts = <91 8 79 8 85 8 73 8>; + interrupts = <91 IRQ_TYPE_LEVEL_LOW>, + <79 IRQ_TYPE_LEVEL_LOW>, + <85 IRQ_TYPE_LEVEL_LOW>, + <73 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&ipic>; clock-frequency = <133333333>; }; /* IPIC - * interrupts cell = <intr #, sense> - * sense values match linux IORESOURCE_IRQ_* defines: - * sense == 8: Level, low assertion - * sense == 2: Edge, high-to-low change + * interrupts cell = <intr #, type> */ ipic: interrupt-controller@700 { interrupt-controller; @@ -340,14 +347,14 @@ ipic-msi@7c0 { compatible = "fsl,ipic-msi"; reg = <0x7c0 0x40>; msi-available-ranges = <0 0x100>; - interrupts = <0x43 0x8 - 0x4 0x8 - 0x51 0x8 - 0x52 0x8 - 0x56 0x8 - 0x57 0x8 - 0x58 0x8 - 0x59 0x8>; + interrupts = <0x43 IRQ_TYPE_LEVEL_LOW + 0x4 IRQ_TYPE_LEVEL_LOW + 0x51 IRQ_TYPE_LEVEL_LOW + 0x52 IRQ_TYPE_LEVEL_LOW + 0x56 IRQ_TYPE_LEVEL_LOW + 0x57 IRQ_TYPE_LEVEL_LOW + 0x58 IRQ_TYPE_LEVEL_LOW + 0x59 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = < &ipic >; }; @@ -355,7 +362,7 @@ pmc: power@b00 { compatible = "fsl,mpc8315-pmc", "fsl,mpc8313-pmc", "fsl,mpc8349-pmc"; reg = <0xb00 0x100 0xa00 0x100>; - interrupts = <80 8>; + interrupts = <80 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&ipic>; fsl,mpc8313-wakeup-timer = <>m1>; }; @@ -374,24 +381,24 @@ pci0: pci@e0008500 { interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0E -mini PCI */ - 0x7000 0x0 0x0 0x1 &ipic 18 0x8 - 0x7000 0x0 0x0 0x2 &ipic 18 0x8 - 0x7000 0x0 0x0 0x3 &ipic 18 0x8 - 0x7000 0x0 0x0 0x4 &ipic 18 0x8 + 0x7000 0x0 0x0 0x1 &ipic 18 IRQ_TYPE_LEVEL_LOW + 0x7000 0x0 0x0 0x2 &ipic 18 IRQ_TYPE_LEVEL_LOW + 0x7000 0x0 0x0 0x3 &ipic 18 IRQ_TYPE_LEVEL_LOW + 0x7000 0x0 0x0 0x4 &ipic 18 IRQ_TYPE_LEVEL_LOW /* IDSEL 0x0F -mini PCI */ - 0x7800 0x0 0x0 0x1 &ipic 17 0x8 - 0x7800 0x0 0x0 0x2 &ipic 17 0x8 - 0x7800 0x0 0x0 0x3 &ipic 17 0x8 - 0x7800 0x0 0x0 0x4 &ipic 17 0x8 + 0x7800 0x0 0x0 0x1 &ipic 17 IRQ_TYPE_LEVEL_LOW + 0x7800 0x0 0x0 0x2 &ipic 17 IRQ_TYPE_LEVEL_LOW + 0x7800 0x0 0x0 0x3 &ipic 17 IRQ_TYPE_LEVEL_LOW + 0x7800 0x0 0x0 0x4 &ipic 17 IRQ_TYPE_LEVEL_LOW /* IDSEL 0x10 - PCI slot */ - 0x8000 0x0 0x0 0x1 &ipic 48 0x8 - 0x8000 0x0 0x0 0x2 &ipic 17 0x8 - 0x8000 0x0 0x0 0x3 &ipic 48 0x8 - 0x8000 0x0 0x0 0x4 &ipic 17 0x8>; + 0x8000 0x0 0x0 0x1 &ipic 48 IRQ_TYPE_LEVEL_LOW + 0x8000 0x0 0x0 0x2 &ipic 17 IRQ_TYPE_LEVEL_LOW + 0x8000 0x0 0x0 0x3 &ipic 48 IRQ_TYPE_LEVEL_LOW + 0x8000 0x0 0x0 0x4 &ipic 17 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&ipic>; - interrupts = <66 0x8>; + interrupts = <66 IRQ_TYPE_LEVEL_LOW>; bus-range = <0x0 0x0>; ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000 0x42000000 0 0x80000000 0x80000000 0 0x10000000 @@ -417,10 +424,10 @@ pci1: pcie@e0009000 { 0x01000000 0 0x00000000 0xb1000000 0 0x00800000>; bus-range = <0 255>; interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = <0 0 0 1 &ipic 1 8 - 0 0 0 2 &ipic 1 8 - 0 0 0 3 &ipic 1 8 - 0 0 0 4 &ipic 1 8>; + interrupt-map = <0 0 0 1 &ipic 1 IRQ_TYPE_LEVEL_LOW + 0 0 0 2 &ipic 1 IRQ_TYPE_LEVEL_LOW + 0 0 0 3 &ipic 1 IRQ_TYPE_LEVEL_LOW + 0 0 0 4 &ipic 1 IRQ_TYPE_LEVEL_LOW>; clock-frequency = <0>; pcie@0 { @@ -448,10 +455,10 @@ pci2: pcie@e000a000 { 0x01000000 0 0x00000000 0xd1000000 0 0x00800000>; bus-range = <0 255>; interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = <0 0 0 1 &ipic 2 8 - 0 0 0 2 &ipic 2 8 - 0 0 0 3 &ipic 2 8 - 0 0 0 4 &ipic 2 8>; + interrupt-map = <0 0 0 1 &ipic 2 IRQ_TYPE_LEVEL_LOW + 0 0 0 2 &ipic 2 IRQ_TYPE_LEVEL_LOW + 0 0 0 3 &ipic 2 IRQ_TYPE_LEVEL_LOW + 0 0 0 4 &ipic 2 IRQ_TYPE_LEVEL_LOW>; clock-frequency = <0>; pcie@0 { -- 2.51.0
