The StMicro NAND chip (512Mbit, 64MB) is connected to the local bus,
the first local bus' user-programmable machine is configured by the
firmware to work with NAND chips.
QE GPIO pin is used to poll the NAND's Ready-Not-Busy signal.
Signed-off-by: Anton Vorontsov <[EMAIL PROTECTED]>
---
arch/powerpc/boot/dts/mpc836x_rdk.dts | 12 ++++++++++++
1 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts
b/arch/powerpc/boot/dts/mpc836x_rdk.dts
index b4f3a17..10237dc 100644
--- a/arch/powerpc/boot/dts/mpc836x_rdk.dts
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -398,6 +398,18 @@
device-width = <1>;
};
+ [EMAIL PROTECTED],0 {
+ compatible = "fsl,upm-nand";
+ reg = <1 0 1>;
+ fsl,upm-addr-offset = <16>;
+ fsl,upm-cmd-offset = <8>;
+ gpios = <&qe_pio_e 18 0>;
+
+ flash {
+ compatible = "stm,nand512-a";
+ };
+ };
+
[EMAIL PROTECTED],0 {
device_type = "display";
compatible = "fujitsu,MB86277", "fujitsu,mint";
--
1.5.6.3
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev
