On Oct 10, 2008, at 1:05 PM, Anton Vorontsov wrote:
The StMicro NAND chip (512Mbit, 64MB) is connected to the local bus, the first local bus' user-programmable machine is configured by the firmware to work with NAND chips. QE GPIO pin is used to poll the NAND's Ready-Not-Busy signal. Signed-off-by: Anton Vorontsov <[EMAIL PROTECTED]> --- arch/powerpc/boot/dts/mpc836x_rdk.dts | 12 ++++++++++++ 1 files changed, 12 insertions(+), 0 deletions(-)
applied. - k _______________________________________________ Linuxppc-dev mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-dev
