ethernet0 (called FSL UEC0 in U-Boot) should be enet1 (UCC3/eth1), and ethernet1 should be enet0 (UCC2/eth0), to be consistent with U-Boot so that the interfaces do not swap addresses when control passes from U-Boot to the kernel.
Signed-off-by: Michael Barkowski <[EMAIL PROTECTED]> Acked-by: Kim Phillips <[EMAIL PROTECTED]> --- Cheat sheet: | *Nickname* | WAN port | LAN switch | | *MAC address* | ethaddr | eth1addr | | *U-Boot name* | FSL UEC0 | FSL UEC1 | | *Linux name* | eth1 | eth0 | | *Phy ID* | 4 | 0 | | *QE Device* | [EMAIL PROTECTED] | [EMAIL PROTECTED] | arch/powerpc/boot/dts/mpc832x_rdb.dts | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts index 226ff06..dea3091 100644 --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts @@ -18,8 +18,8 @@ #size-cells = <1>; aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; + ethernet0 = &enet1; + ethernet1 = &enet0; serial0 = &serial0; serial1 = &serial1; pci0 = &pci0; -- 1.5.4.3 _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev