On Fri, Nov 14, 2008 at 10:16:19AM -0500, Michael Barkowski wrote:
> David Gibson wrote:
>> On Thu, Nov 13, 2008 at 10:18:28AM -0500, Michael Barkowski wrote:
>>> ethernet0 (called FSL UEC0 in U-Boot) should be enet1 (UCC3/eth1), and
>>> ethernet1 should be enet0 (UCC2/eth0), to be consistent with U-Boot so
>>> that the interfaces do not swap addresses when control passes from
>>> U-Boot to the kernel.
>>
>> Um.. why is just swapping the aliases, rather than the enet labels the
>> right approach here?
>
> Kim suggested it was better to localize the port ordering as a
> property of the board rather than that of the QE, and I agreed.
And the enet0/enet1 names that appear in the labels come from the QE
documentation?
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
