Yes I have actually. I have booted a 2.6.28.6. Same problem.
Also, is it me but at some point from 2.6.23 to 2.6.28 did they
started using hex numbers in the .dts file for "interrupts = " without
the 0x preamble?
I've been looking at 2.6.20, 2.6.23, and 2.6.28 .dts files for this
board and .28 looked way different in the interrupt section for the
eTSEC.
Quoting Kumar Gala <ga...@kernel.crashing.org>:
On Mar 11, 2009, at 10:52 AM, Mark Bishop wrote:
Has anyone been able to get a newer Freescale BSP to work with a
RevA (processor version 1.0) RDB?
The boards we received didn't have SPI compiled into the kernel and
when we went to go re-compile the kernel using the 20081222 and
20080711 BSPs. I realize that the interrupts were reversed for
eTEC1 and eTEC2 and I've made the changes in the .dtb file and I no
longer hang when I ping, etc. But I still can't get the board on
the network. I've verified it isn't the network settings.
I've pinged Freescale for support (didn't help much) and I am now
looking for someone who has actually done it (if ever).
Have you tried a kernel.org kernel? The group here would be more
than happy to help with any issues you might find with the
kernel.org kernel.
- k
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
