On Dec 1, 2011, at 9:55 PM, Tabi Timur-B04825 wrote: > Jia Hongtao-B38951 wrote: >> Hi >> >> I just found that the 'next' branch you mentioned have problem to boot up. >> I test it in p1022ds and p1010rdb boards and the result are both the same. >> Note that for p1022ds I use "make p1022ds.dtb" to make the dtb file(36bit) >> with 36bit-uboot. >> And for p1010rdb I use all 32bit image. >> The problem list below: >> >> scsi0 : sata_fsl >> ata1: SATA max UDMA/133 irq 74 >> fsl-sata fffe19000.sata: Sata FSL Platform/CSB Driver init >> scsi1 : sata_fsl >> ata2: SATA max UDMA/133 irq 41 >> Fixed MDIO Bus: probed >> Unable to handle kernel paging request for data at address 0x00000000 >> Faulting instruction address: 0xc0451630 >> Oops: Kernel access of bad area, sig: 11 [#1] > > Andy has phy driver patch that fixes this.
Andy, What's going on here? Is there a fix in v3.2-rc4? - k _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev