This still needs a dts fix from Andy. - k
On Dec 7, 2011, at 1:27 AM, Jia Hongtao-B38951 wrote: > Is this the patch you mentioned? > http://patchwork.ozlabs.org/patch/128806/ > > I applied this patch but the issue was still there. > > -----Original Message----- > From: Tabi Timur-B04825 > Sent: Friday, December 02, 2011 11:56 AM > To: Jia Hongtao-B38951 > Cc: Kumar Gala; linuxppc-dev@lists.ozlabs.org; Li Yang-R58472; Fleming > Andy-AFLEMING > Subject: Re: [linuxppc-release] [powerpc] boot up problem > > Jia Hongtao-B38951 wrote: >> Hi >> >> I just found that the 'next' branch you mentioned have problem to boot up. >> I test it in p1022ds and p1010rdb boards and the result are both the same. >> Note that for p1022ds I use "make p1022ds.dtb" to make the dtb file(36bit) >> with 36bit-uboot. >> And for p1010rdb I use all 32bit image. >> The problem list below: >> >> scsi0 : sata_fsl >> ata1: SATA max UDMA/133 irq 74 >> fsl-sata fffe19000.sata: Sata FSL Platform/CSB Driver init >> scsi1 : sata_fsl >> ata2: SATA max UDMA/133 irq 41 >> Fixed MDIO Bus: probed >> Unable to handle kernel paging request for data at address 0x00000000 >> Faulting instruction address: 0xc0451630 >> Oops: Kernel access of bad area, sig: 11 [#1] > > Andy has phy driver patch that fixes this. > > -- > Timur Tabi > Linux kernel developer at Freescale _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev