Is this the patch you mentioned? http://patchwork.ozlabs.org/patch/128806/
I applied this patch but the issue was still there. -----Original Message----- From: Tabi Timur-B04825 Sent: Friday, December 02, 2011 11:56 AM To: Jia Hongtao-B38951 Cc: Kumar Gala; linuxppc-dev@lists.ozlabs.org; Li Yang-R58472; Fleming Andy-AFLEMING Subject: Re: [linuxppc-release] [powerpc] boot up problem Jia Hongtao-B38951 wrote: > Hi > > I just found that the 'next' branch you mentioned have problem to boot up. > I test it in p1022ds and p1010rdb boards and the result are both the same. > Note that for p1022ds I use "make p1022ds.dtb" to make the dtb file(36bit) > with 36bit-uboot. > And for p1010rdb I use all 32bit image. > The problem list below: > > scsi0 : sata_fsl > ata1: SATA max UDMA/133 irq 74 > fsl-sata fffe19000.sata: Sata FSL Platform/CSB Driver init > scsi1 : sata_fsl > ata2: SATA max UDMA/133 irq 41 > Fixed MDIO Bus: probed > Unable to handle kernel paging request for data at address 0x00000000 > Faulting instruction address: 0xc0451630 > Oops: Kernel access of bad area, sig: 11 [#1] Andy has phy driver patch that fixes this. -- Timur Tabi Linux kernel developer at Freescale _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev