On Jul 10, 2012, at 1:08 AM, Jia Hongtao wrote:
> The issue log on core1 is:
> root@mpc8572ds:~# ifconfig eth0 10.192.208.244
> net eth0: could not attach to PHY
> SIOCSIFFLAGS: No such device
>
> To attach PHY node mdio@24520 should not be disabled in dts of core1.
> Because all PHYs are controlled through this node as follows:
>
> mdio@24520 {
> phy0: ethernet-phy@0 {
> interrupts = <10 1 0 0>;
> reg = <0x0>;
> };
> phy1: ethernet-phy@1 {
> interrupts = <10 1 0 0>;
> reg = <0x1>;
> };
> phy2: ethernet-phy@2 {
> interrupts = <10 1 0 0>;
> reg = <0x2>;
> };
> phy3: ethernet-phy@3 {
> interrupts = <10 1 0 0>;
> reg = <0x3>;
> };
>
> tbi0: tbi-phy@11 {
> reg = <0x11>;
> device_type = "tbi-phy";
> };
> };
>
> Signed-off-by: Li Yang <[email protected]>
> Signed-off-by: Jia Hongtao <[email protected]>
> ---
> arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts | 3 ---
> 1 files changed, 0 insertions(+), 3 deletions(-)
applied to next
- k
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://lists.ozlabs.org/listinfo/linuxppc-dev
