> -----Original Message----- > From: Wood Scott-B07421 > Sent: Wednesday, July 11, 2012 2:15 AM > To: Jia Hongtao-B38951 > Cc: linuxppc-dev@lists.ozlabs.org; ga...@kernel.crashing.org > Subject: Re: [PATCH 1/2] powerpc/mpc8572ds: Fix eTSEC is not available on > core1 of AMP boot issue > > On 07/10/2012 01:08 AM, Jia Hongtao wrote: > > The issue log on core1 is: > > root@mpc8572ds:~# ifconfig eth0 10.192.208.244 > > net eth0: could not attach to PHY > > SIOCSIFFLAGS: No such device > > > > To attach PHY node mdio@24520 should not be disabled in dts of core1. > > Because all PHYs are controlled through this node as follows: > > So you grant it to both partitions? How do you deal with synchronization? > > -Scott
PHY nodes are only used by ethernet. Each ethernet is used by only one partition (disabled in the other partition). So I think there is no synchronization issue. Thanks. -Jia Hongtao. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev