On Fri, 2013-06-07 at 13:52 +1000, Benjamin Herrenschmidt wrote: > So I got the rev2 chip today, put it in, and PCI-E is still not getting > a link. Since the LEDs of the e1000 aren't coming up at all, I *suspect* > the slots are getting no power. > > Is there a power control somewhere ? Maybe some DIP or jumpers that > might have gone off ?
Forget it, reset all the jumpers to the default setup (found the doc !) and they come up now in slot 4 and 7. It also looks like uBoot now has an e1000 driver so I don't have to use fman (for which I believe there is still no upstream driver right ?) BTW. Is that normal during boot ? Net: Initializing Fman Fman1: Uploading microcode version 106.1.7 PHY reset timed out PHY reset timed out PHY reset timed out PHY reset timed out Cheers, Ben. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev