On Fri, 2013-06-07 at 04:45 +0000, Zang Roy-R61911 wrote: > > > Forget it, reset all the jumpers to the default setup (found the doc !) > > and they come up now in slot 4 and 7. It also looks like uBoot now has an > > e1000 driver so I don't have to use fman (for which I believe there is > > still no upstream driver right ?)
> fman in u-boot has been up streamed. It should work. I don't care much about u-boot :-) It's the kernel that matters to me. > > > > BTW. Is that normal during boot ? > > > > Net: Initializing Fman > > Fman1: Uploading microcode version 106.1.7 PHY reset timed out PHY reset > > timed out PHY reset timed out PHY reset timed out > You can ignore the timeout. > Do you plug other card (for example SGMII card) on the board? No, only PCIe in slot 4 and 7. > u-boot detects some card in the slot and tries to init the PHY but fails. Cheers, Ben. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
