In message <[EMAIL PROTECTED]> you wrote: > > Which ELDK and kernel do you use? I had the same problem on this board > with a PLX9054 based PCI card on a 2.4.25 kernel. I switched to the 2.6 > kernel and the 4.1 ELDK and the card was scanned correctly. > But keep in mind that the linux PLX drivers do not work out of the box > with a big endian platform like the MPC5200. Although there is a > BIG_ENDIAN flag in the makefiles there are still some places left in the > driver code which have to be patched (the parts with int64 adresses). > It's not so easy to compile the PLX drivers on the 4.1 ELDK because of > missing headers in the ppc architecture. I managed to build the drivers > for the 2.6.19 kernel and I was able to work with the card except the > DMA routines (still working on this issue).
WHy don't you use the arch/powerpc configuration, then? Note that the STK5200 has never been supported in a 2.6 kernel with a arch/ppc configuration. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] "When the only tool you have is a hammer, you tend to treat everything as if it were a nail." - Abraham Maslow _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
