Hi, i build Linux-2.6.22-gbcfc8d37 kernel lastest kernel from denx git for the board (STK5200 with TQM5200-AB). ELDK 4.1 version is used.
make mrproper export ARCH=powerpc make tqm5200_defconfig make uImage It hangs on after following line Uncompressing Kernel Image ... OK Our u-boot version : U-Boot 1.1.3 (Apr 7 2005 - 14:42:37) Any idea will be appreciated. Regards. done Bytes transferred = 1454056 (162fe8 hex) ## Booting image at 00200000 ... Image Name: Linux-2.6.22-gbcfc8d37 Created: 2007-08-28 19:41:27 UTC Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1453992 Bytes = 1.4 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK -----Original Message----- From: Wolfgang Denk [mailto:[EMAIL PROTECTED] Sent: Mon 8/27/2007 10:14 PM To: Mustafa Cayir Cc: Oliver Rutsch; [email protected] Subject: Re: STK5200 pci_enable_device problem In message <[EMAIL PROTECTED]> you wrote: > > i use 2.4.25 kernel and eldk 3.1.1 on TQM5200 board. i tried denx 2.6.19 > kernel to port on TQM5200 but i couldn't. > Did you port 2.6 kernel on TQM5200? Did pci device start working > succesfully after porting 2.6 kernel to TQM5200 board. Current top-of-tree in our git repo has been tested with a Intel EEPRO100 network card in the ST5200's PCI slot. It's working. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] Unsichtbar macht sich die Dummheit, indem sie immer größere Ausmaße annimmt. -- Bertold Brecht: Der Tui-Roman
_______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
