Hi, [...]
>> It's not so easy to compile the PLX drivers on the 4.1 ELDK because of >> missing headers in the ppc architecture. I managed to build the drivers >> for the 2.6.19 kernel and I was able to work with the card except the >> DMA routines (still working on this issue). > > WHy don't you use the arch/powerpc configuration, then? Note that the > STK5200 has never been supported in a 2.6 kernel with a arch/ppc > configuration. > Because I found at least a lite5200 configuration in the 4.1 ELDK (2.6.19.2 kernel) in the ARCH/ppc architecure. With ARCH/powerpc I only had a few configurations for other modules and I wasn't able to build a running kernel for the TQM5200 (maybe my fault). Is there support for the TQM5200 and the STK5200 with ARCH/powerpc in newer kernels? I'm still using the 3.1.1 ELDK for the TQM5200 as it have everything I need and I don't need to use the PLX card in this board (although it would have been nice if I got it working...). Bye, -- Dipl. Ing. Oliver Rutsch _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
