On Nov 13, 2007 3:33 PM, Clemens Koller <[EMAIL PROTECTED]> wrote: > robert lazarski schrieb: > > Hi all, > > > > I'm trying to bring up a new 8548 board on 2.6.23.1 . When booting, > > Some times I can get as far mounting over nfs. However, it gets stuck > > here: > > > > NET: Registered protocol family 1 > > NET: Registered protocol family 17 > > e0024520:02 not found > > eth2: Could not attach to PHY > > IP-Config: Failed to open eth2 > > IP-Config: Device `eth2' not found. > > As already written in the u-boot-users list, > you could give the pauilis.git tree a try. > > There have been recently (last month) several > PHY related changes. 2.6.23.1 seems to be too > "old". >
I'm now running pauilis.git and 2.6.24rc2, along with a new custom board. I still can't attach to the phy though. I know the phy works because it works fine in u-boot. Clemens, IIRC you are using the 88e1111 - is that with the gianfar driver? I'm having problems getting soft reboot to work with pauilis.git from some reason so debugging is slow going - might someone have some hints? Thanks, Robert _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded