robert lazarski schrieb: > I'm now running pauilis.git and 2.6.24rc2, along with a new custom > board. I still can't attach to the phy though. I know the phy works > because it works fine in u-boot. Clemens, IIRC you are using the > 88e1111 - is that with the gianfar driver?
Yes, yes. (I still have to check my PHY addresses.) > I'm having problems getting > soft reboot to work with paulus.git from some reason so debugging is > slow going - might someone have some hints? I can also ACK your reboot-problem. $ shutdown -r now stops here at: Restarting system. IIRC, there were some patches some time ago changing some powerpc reboot stuff... Propably, git-bisect will be our friend. The latest working kernel over here was: Linux-2.6.21-rc5-g9a5ee4cc with ARCH=ppc I think it was also from paulus. Now I am at ARCH=powerpc. Regards, Clemens Koller __________________________________ R&D Imaging Devices Anagramm GmbH Rupert-Mayer-Straße 45/1 Linhof Werksgelände D-81379 München Tel.089-741518-50 Fax 089-741518-19 http://www.anagramm-technology.com _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded