Hi Friends,
Do we have any performance numbers for the ptp4l stack performance on a 10Gbps
link? When I increase the sync packet frequency to 512 and the DelayReq packet
frequency to 512, I see many synchronization faults, meaning that the ptp4l
runs for some time, faces synchronization faults, resumes the sync operation,
faces the sync faults and resumes the operation showing a lot of instability in
the overall ptp stack operation.
Is it due to the limitation from the stack performance as the HW supports a 10G
link? The 512 packets per sync and 512 packet sets of {DelayReq, DelayResp}
donot occupy even 1% of the 10Gbps bandwidth.
Could you elaborate your experience with the ptp4l performance?
Thanking you in anticipation,
Regards,
Chandra
(c) : 0175508142
(O): 701.6412
"Knowledge speaks, Wisdom listens"
________________________________
Confidentiality Notice.
This message may contain information that is confidential or otherwise
protected from disclosure. If you are not the intended recipient, you are
hereby notified that any use, disclosure, dissemination, distribution, or
copying of this message, or any attachments, is strictly prohibited. If you
have received this message in error, please advise the sender by reply e-mail,
and delete the message and any attachments. Thank you.
------------------------------------------------------------------------------
Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and developed in partnership with Slashdot Media, is your hub for all
things parallel software development, from weekly thought leadership blogs to
news, videos, case studies, tutorials and more. Take a look and join the
conversation now. http://goparallel.sourceforge.net/
_______________________________________________
Linuxptp-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/linuxptp-users
